P40 Monoblock Spool Valve 40 LPM The P40 low profile monoblock spool valve has been specifically designed for use in mobile hydraulic applications. It is compact but has a flow capacity of 40 lpm at 250 bar. With quality by design, high specification materials, 100% production testing and a choice of series or parallel circuitry. The P40 valve is an economic alternative to currently available Description monoblocks. Compact monoblock construction with up to 7 spools with a common load check valve or 3 and 4 spools with individual load check valves to comply with machine safety requirements. Adjustable relief valves and universal levers. Supplied with an adjustable relief valve and levers as standard. The valve is available with a range of spool options and centering mechanisms as well as pneumatic control to suit a variety of mobile and industrial applications. Application Suited to mobile applications where space is limited and a cost effective valve is required with good flow characteristics. Used extensively in mobile, industrial and mechanical handling services. TYPICAL PRESSURE DROP CURVES FOR 1 SECTION TO 4 SECTION BANKS 8.0 P-T (4) FLOW (l/min) Individually tested. Compact. 1 to 7 spools options. Universal lever. Cable option. Low profile. Individual load check option. Adjustable relief valve. Micro switch option Pressure beyond option. Open or closed centre

P40 Monoblock Spool Valve 40 LPM ORDER CODE R D DOUBLE ACTING A SINGLE ACTING 'A' PORT M MOTOR RELIEF VALVE R TOP ENTRY G1/2 SIDE ENTRY G1/2 LEVER MECHANISM NO LEVER STANDARD LEVER REVERSED LEVER O OUTLET G1/2 C CLOSED CENTER G1/2 P PRESSURE BEYOND G1/2 PORTING T4 TOP PORT: G1/2 SPRING CENTRED: 3 POSITION S4 SIDE PORT: G1/2 SPRING CENTRED: 2 POSITION DETENT LOCATED: 3 POSITION DETENT LOCATED: 2 POSITION SPRING/DETENT LOCATED: 3 POSITION PNEUMATIC OPERATION: 3 POSITION PNEUMATIC OPERATION: 2 POSITION NOTE: TOP PORT OPTIONS NOT AVAILABLE ON ONE-SPOOL VALVE. Technical Data INSTALLATION DETAILS 1...