Hydratight DL Ricci On-Site Machining Solutions - Technical Data Overview

This document provides technical specifications for Hydratight’s DL Ricci brand on-site machining equipment, specifically focusing on the TTL (Taper Turning Lathe) models.

1. Measurement Units and Ranges

• Standard Units (inches): Shaft range from 18 to 24 inches, axial clearance of 48.5, travel of 91, and taper dimension of 67, with an operational taper angle between 0 to 7 degrees.
• Metric Units (millimeters): Shaft range from 457 to 609.6 mm, axial clearance of 1232 mm, travel of 2311.4 mm, taper dimension of 1702 mm, and taper angle between 0 to 7 degrees.

2. Key Parameters

• A - Shaft Range: Defines the diameter range of shafts the lathe can accommodate.
• B - Radial Clearance: Specifies the radial space available for machining operations.
• C* - Axial Clearance: Indicates the axial space allowance for the tool movement.
• D* - Travel: Represents the maximum linear movement capability of the lathe tool.
• E* - Taper: Defines the taper angle range the lathe can machine, from 0 to 7 degrees.

3. Model Identification

The TTL 24 model is highlighted, indicating a specific variant within the TTL series designed for taper turning operations.

4. Application and Usage

The data suggests the equipment is designed for precision taper turning on shafts within the specified size ranges, suitable for on-site machining tasks requiring controlled axial and radial clearances and travel.

Summary

This technical data sheet outlines the critical dimensions and operational parameters for Hydratight’s TTL taper turning lathes, emphasizing their capability to handle shafts between 18-24 inches (457-609.6 mm) with precise taper machining up to 7 degrees. The clearances and travel distances ensure adaptability for various on-site machining requirements.