Electric Tensioner Pump Physical Description Width: Height: Depth: Weight (with fluid): This new high pressure electric pump has been specifically designed for tensioning applications. Hydratight incorporates the latest technology to produce a pump with features and benefits which far surpass all other electric tensioner pumps available on the market today. This electric tensioner pump will stay on the job longer and requires less maintenance, both of which will reduce service costs. Hydraulic Performance Mechanical contactor with fuses (hot and neutral), NEMA 4 enclosure, 20ft 10 GA S/O cord input, hour meter on box • Adjustable relief valve 1.7 GPM until high pressure boost. 0.13 GPM to 22,000 psi 60 Hz Electric Motor (50 Hz also available, CE approved) 1.5 hp at 3,450 rpm 115 VAC 230 VAC 1 phase 18 full load amps 10 full load amps Motor Starter • Bypass sequence valve 1.7 GPM free flow. 1700 psi nominal for full 22,000 psi output • Two button pendant with kill switch High pressure hyraulic intensifier to 33,000 psi • Designed for constant filtration and de-aeration • Heavy duty electrical and pendant cords with restraints • Compact design with durable, steel frame • Ensures operators achieve target pressure every time Filtration Norminal in-tank suction Absolute return line Solenoid Valve – Coil Range Options 120 VAC • Wide range of tensioning capabilities • Reduces operator time to tension each bolt due to quicker pressurisation Main Safety Valve • Reduces operator time between studs • Improves performance and reduces downtime Factory pre-set internal relief valve Panel Mounted Regulator Fully adjustable pressure (0 - max) Panel Mounted Gauge 30,000 psi 4" dual scale (psi and bar) gauge Pendant Incorporates 2 buttons – advanced and retract, a kill switch, 20ft S/O cord with strain reliefs, 5 A fused protection and a moulded 12 GA male plug Further details can be obtained from your local Hydratight representative or visit the website hydratight.com. 1 Gallon, 10 micron air breather,