Model Specifications and Dimensions

The document provides dimensional data for various BU models, including BU21, BU31, BU44, BU60, BU70, BU85, and BU110. Measurements are given in both metric (millimeters) and standard (inches) units.

Key Parameters:

• Model BU21: Size range 10-21 mm; dimensions A and B approximately 28 mm and 21 mm respectively.
• Model BU31: Size range 22-31 mm; dimensions A and B approximately 38 mm and 31 mm respectively.
• Model BU44: Size range 32-44 mm; dimensions A and B approximately 51 mm and 44 mm respectively.
• Model BU60: Size range 45-60 mm; dimensions A and B approximately 67 mm and 60 mm respectively.
• Model BU70: Size range 55-70 mm; dimensions A and B approximately 82 mm and 70 mm respectively.
• Model BU85: Size range 61-85 mm; dimensions A and B approximately 117 mm and 85 mm respectively.
• Model BU110: Size range 82-110 mm; dimensions A and B approximately 139.7 mm and 110 mm respectively.

Additional Dimensions:

Dimension C is consistently 5.500 inches (139.7 mm) across models, while dimension D varies between 3.500 inches (88.9 mm) and 5.500 inches (139.7 mm) depending on the model.

Contact and Support Information

The document includes contact details for D.L. Ricci Corp., located at 5001 Moundview Drive, Red Wing, MN 55066, USA. Support is available for sales, rental, and technical inquiries anytime and anywhere.

• Email: [email protected]
• Phone: 651-388-8661
• Fax: 651-388-0002
• Website: www.dlricci.com

Summary

This document serves as a technical reference for BU facer models, providing essential size specifications and contact information for support. The consistent dimension C and variable dimension D are critical parameters for fitting and installation. The data supports selection and application of BU models based on size requirements.