Catalogs >
Hydratight >
Air Powered Torque Wrench Pump

Air Powered Torque Wrench Pump
1Pages

Catalog excerpts

Air Powered Torque Wrench Pump This 700-bar high-pressure air powered hydraulic pump is designed specifically for bolting applications. The high-efficiency design provides higher flow rates, improved speed, and increased service life and offers ‘best in class’ performance over comparable pumps. Model shown with optional roll cage installed An integrated heat exchanger cools the oil and warms exhaust air to prevent freezing. The control pendant (6m/20ft) enables ergonomic control and safer operation. Optional accessories such as an 8 liter (2.1 gal) reservoir, skid bar, 4 port manifold, roll cage and CEJN couplings are also available. Features and benefits: • igh efficiency pump design, higher oil flow and H bypass pressure. Physical Description Width 19.5" Height 20.5" Depth 12.6" Weight (without oil and cage) 92.6 lbs For full weight add 1 kg (2.2 lbs) for each litre of oil Oil reservoir capacity 1.06 gal Operator pendant 20 feet Air Supply Dynamic air pressure range Air consumption Noise Level • wo-speed operation reduces cycle time for T improved productivity. • ser adjustable relief valve built-in on manual valves. U Oil ports on valves are 3/8" NPTF. • n integrated heat exchanger warms exhaust air to A prevent freezing and cools the oil. • lycerine filled pressure gauge with transparent G torque overlays. • Ergonomic 6m (20ft) operator pendant control. Hydraulic Performance 8.3 LPM at 50 bar (stage 1); 1 LPM at 700 bar (stage 2) Further details can be obtained from your local Hydratight representative or via the website hydratight.com.

Open the catalog to page 1