- Catalogs
- Hydraproducts
- Standard Power Pack
Standard Power Pack
Standard Power Pack
The HPS Standard construction power packs are designed with modular components for easy specification and maintenance. They are versatile and can be customized to meet various requirements.
- Steel Tank Capacities: 16, 30, 55, 75, 100, and 180 Litres
- Aluminium Gear Pumps
- Pressure Capacity: Up to 250 bar
- Flow Rates: Up to 100 litres/minute
- Filters: Suction filter (90 micron), Return filter (25 micron)
- Submerged Pump
- Cetop Subplate Options
- Motor Options: 1 phase up to 3kW, 3 phase up to 30kW
- 100% Functional Testing
- Painted Finish Tanks
- Motors: IEC frame B5 IP55
- Supplied with Certificate of Conformity (C of C)
The ordering code includes specifications for motor type, motor power, pump size, orientation, manifold plate, Cetop plate, reservoir type, and optional accessories.
- Motor Types: 240V 1ph, 415V 3ph, 110V 1ph, None
- Motor Power Range: 0.55kW to 30kW
The power pack includes components such as motor, pump, bellhousing, filters, manifold block, pressure gauge, tank, and level gauge. Dimensions and pump sizes vary based on tank capacity.
Pumps are categorized by displacement (cc/rev), flow rate (litres/minute), and maximum pressure (bar). Various pump sizes are available to match specific requirements.
The hydraulic circuit diagram outlines the flow and components involved in the system, with optional features marked.
Guidelines for selecting the appropriate pump, motor, and tank combination based on flow rate and pressure requirements. The tank volume should generally be at least three times the flow rate.
Catalog excerpts
Standard Powerpack – modular build vertical HPS type Description The HPS Standard construction power packs are designed to utilise a standard range of modular components. This offers a power pack that can be easily specified and maintained. Design - Steel Tank 16, 30, 55, 75, 100 & 180 Litre - Aluminium Gear pumps - Pressures to 250 bar - Flow rates to 100 litres/minute - Suction filter 90 micron - Return filter 25 micron - Submerged Pump - Cetop subplate options - 1 phase to 3kW - 3 phase to 30kW - 100% functional testing - Tanks with painted finish - Motors IEC frame B5 IP55 - Supplied with C of C
Open the catalog to page 1
Ordering Code Hydraproducts build number Type Motor type S = 240V 1ph T = 415V 3ph H = 110V 1ph N = None Accessories – optional Oil Low Level switch = L Thermostat = T Air blast Cooler = A Oil/Water Cooler = W Hand Pump = P Drain port boss ½”BSP = D Heater = H None = N Type of Reservoir 16 Litre = 16C 30 Litre = 30C 55 Litre = 55C 75 Litre = 75C 100 Litre = 100C 180 Litre = 180C Cetop plate NG6 cetop03 (40lpm max) = 3 NG10 cetop05 (80lpm max) = 5 None = N Pump size See page 4 Manifold plate P-T BSP Ports with Relief Valve = P Bespoke manifold system = X Validity of all specifications and order...
Open the catalog to page 2
Motor Pump Bellhousing and coupling Suction filter Manifold block Return Filter & Indicator Pressure Gauge Gauge Isolator Tank Level Gauge Filler Breather Pump size cc (litre per minute) Motor size
Open the catalog to page 3
Pump Selection Pump No, Displacement Flow at 1450rpm Max Pressure
Open the catalog to page 4
PUMP – MOTOR – TANK SELECTION TANK SIZES AVAILABLE (LITRES) Eg. Group1 pump with 3.15cc/rev gives flow rate of 4.6lpm, Max Pressure of 181bar, Motor 1.5kW, 30 Litre Tank Design notes:In general the tank volume should be a minimum 3 times the flow rate. Eg – 30lpm flow = 100 Litre Tank
Open the catalog to page 6All Hydraproducts catalogs and technical brochures
Full Brochure16 Pages
Pressure Relief Valve2 Pages
Flow Control Valve2 Pages
Pilot Operated Check Valve2 Pages
Hydraulic HPU6 Pages
HPM Mini Powerpacks16 Pages
