Intro. to Sandwich Valves (Ref. Info.) - 4 Pages

Add to MyDirectIndustry favorites
Intro. to Sandwich Valves (Ref. Info.)

Catalog excerpts

Sandwich Valve Labels & Symbols The letters A and B stamped on the manifold indicate the side of the manifold which serves as port A and port B, relative to the valve symbol and the ISO/CETOP mounting surface. Numbers ➀ and ➁ stamped on the manifold indicate the surface to be positioned toward the sub-base manifold surface vs. the four-way valve surface. Small uncircled numbers in the valve symbol indicate the port logic of the cavity used. Individual cartridge product pages explain this port logic and labeling.

 Open the catalog to page 1

Reversible & Non-Reversible Sandwich Valves REVERSIBLE SANDWICHES Some sandwich valves may be flipped to reverse function direction. These require the installation of a seal plate, as no O-ring counterbores are provided on the sandwich body. When sandwich valves are ordered complete, required seal plates are automatically provided. These are indicated in the description adjacent to the symbol. Blocking on B, Normally Closed Side Up: 2 Block No.: 7170820 Plug: 6103010 Plug Side: A Load Holding on B, Normally Closed Side Up: 1 Block No.: 7170820 Plug: 6103010 Plug Side: A Seal Plate: Yes...

 Open the catalog to page 2

Sandwich Valve Ordering Information TO ORDER SANDWICH VALVES COMPLETE First, review the products available on the forthcoming pages and select the BASE MODEL NUMBER as indicated in the examples below. Note that the sandwich body code substitutes for the standard in-line body code in the same model field. Blocking on B, Normally Closed Side Up: 2 Block No.: 7170820 Plug: 6103010 Plug Side: A Seal Plate: Yes Catalog Ref.: 1.044.1 Base Model No. Normally Open, Block B to A Side Up: 2 Block No.: 7170810 Plug: CP10-20-x Plug Side: B Seal Plate: No Catalog Ref.: 1.053.1 Second, once you know your...

 Open the catalog to page 3

Blue rectangles are links to other catalog pages. Sandwich Valve Ordering Information TO ORDER SANDWICH VALVE PARTS Standard HydraForce sandwich valves may be ordered in parts format. The base model tables indicate the parts required to complete a unit. Dual Load Holding, Normally Closed Load Holding on A, Normally Closed Plug: 6103010 Plug Side: A Model No. SV10-22-S03A-x-xx Seal Plate: Yes Model No. SV10-22-S03B-x-xx Seal Plate: Yes Plug: CP10-20-x Plug Side: B Normally Closed, Block B to A Load Holding on B, Normally Closed Normally Open, Block B to A Plug: 6103010 Plug Side: B Plug:...

 Open the catalog to page 4

All HYDRAFORCE catalogs and technical brochures

  1. INTEGR8

    4 Pages

  2. INTEGR8

    36 Pages

  3. HTD10-40

    4 Pages

  4. Harvesting

    8 Pages

  5. Wheel Loaders

    8 Pages

  6. Excavators

    8 Pages

  7. Tractors

    8 Pages

  8. 2-002

    1 Pages

Archived catalogs