*mydirectindustry

S6T

S6T

Product catalog summary

Overview: The document provides technical specifications and features of the S6T and S6TDI hydraulic submersible utility pumps, designed for various industrial applications such as sewer bypass, digester cleaning, and inline pumping. These pumps are known for their lightweight, compact design and ability to handle large solids and slurries.

Models:

S6T: Aluminum body, lightweight at 202 lbs (92 kg).
S6TDI: Ductile iron body, heavier at 330 lbs (150 kg).

Key Features:

Fully recessed stainless steel vortex impeller capable of passing 5" semi-solids.
Variable speed hydraulic drive for a wide range of performance.
Oil-lubricated seals allowing dry operation.
Optional tungsten carbide wear parts.
Can be bolted directly into pipelines or used as a booster pump.
Safe hydraulic drive suitable for hazardous environments.
Optional silt jetting ring for agitating solids.

Specifications:

Discharge: 6" NPT(F).
Inlet Flange: 6", 125# ASA.
Solids Handling: 5" without strainer, 2-1/2" with strainer.
Hydraulic Oil: 214-320 s.s.u. @ 100°F (64°C).
Input Flow: Max 30 GPM (114 LPM).
Operating Pressure: Max 3000 PSI (204 Bar).

Materials:

Pump Body: Heat-treated aluminum (S6T) or ductile iron (S6TDI).
Impeller, Wear Ring, Wear Plate, Shaft: Stainless steel.
Shaft Seal: Carbon/Ceramic standard, Silicon Carbide optional.
Elastomers: Buna N standard.

Performance: Operates with HT50 to HT75 power units or other hydraulic power sources capable of flows of 15 - 30 GPM.

Catalog excerpts

6” HYDRAULIC SUBMERSIBLE UTILITY PUMP MODELS S6T (Aluminum Body) S6TDI (Ductile Iron Body) 6” (15 cm) Discharge The S6T is our most popular 6" Pump. It is lightweight, compact and able to pass large solids, stringy materials and slurries with entrained gases. This versatile,powerful top discharge pump is designed for sewer bypass jobs, digester cleaning, plant intake desilting and inline pumping. Shut off head to 120 feet. FEATURES Fully Recessed SS Vortex Impeller (will pass 5" semi-solids), SS wear plate and wear ring Variable Speed hydraulic drive provides a wide range of performance Oil Lubricated Seals (can run dry) Tungsten Carbide wear parts available as an option Can be bolted directly into a pipeline or used as a booster pump Safe Hydraulic Drive can be used where electric power is hazardous or impractical Optional silt jetting ring is available for agitating solids into suspension Operates with our HT50 to HT75 power units or other hydraulic power sources capable of flows of 15 - 30 GPM Stainless Steel model available 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail:

Open the catalog to page 1

Typbal performance with HT60 Power Unit Curves are based on pumping water at 60 F. For performance curves other than shown above, consult factory 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]

Open the catalog to page 2