HYDRA-TECH PUMPS MODELS S6SCR 6” (15 cm) Discharge The S6SCR is ideal for pumping higher viscosity liquids such as heavy fuel oils, latex, and refinery wastes using a positive displacement screw. When pumping lighter materials the impeller acts as centrifugal type providing high capacity pumpage. Standard type pump for oil recovery operations. FEATURES • Unique Centrifugal Screw Impeller for pumping of liquids with viscosities • Small Overall Size allows for use in confined spaces • Low Emulsifying properties • Low Shear of liquids • Can be used inline as a booster pump • Safe Hydraulic Drive can be used where electric power is hazardous or impractical • Operates with our HT60 to HT125 power units or other hydraulic power sources capable of flows of 25 - 39 GPM • High Efficiency Bent Axis Motor D0516 OPERATING PRESSURE:.. Max. 4500 PSI (300 Bar) POWER SOURCE:... Any Open Center Hydraulic System Specifications are subject to change without notice 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]

Hydraulic Input Curves are based on pumping water at 60 F. For performance curves other than shown above, consult factory. 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]