6” HYDRAULIC SUBMERSIBLE AXIAL FLOW HIGH VOLUME PUMP MODEL S6P 6” (15 cm) Discharge The S6P is a lightweight axial flow pump designed for pumping high volumes of water at relatively low heads. The propeller design allows this pump to be driven by small hydraulic power sources such as small tractors, backhoes or our 10 to 13 HP power units. This pump is great for lake draining, tank filling, flood irrigation, aerial firefighting and cofferdam dewatering. Flows to 1100 GPM! Use auxillary power from a tractor to flood duck blinds quickly. High Volume Axial Propeller design Very Light Weight allows for one person set-up Small Overall Size for use in very tight spaces Variable Speed hydraulic drive Dependable gear type hydraulic motor Safe Hydraulic Drive can be used where electric power is hazardous or impractical Operates with our HT10 to HT13 power units or other hydraulic power sources capable of flows of 5 - 6.5 GPM 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com

S6P Typical Performance 30 Cu.Mtr./Hr. CAPACITY Curves are based on pumping water at 60" F For performance curves other than shown above, consult factory. 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]