*mydirectindustry

S6300

Product catalog summary

Overview: The S6300 is a high-performance hydraulic submersible pump designed for efficient solids handling. It is suitable for applications such as sewer by-pass, barge transfer, municipal waste lagoon, tank pumping, and as a high-volume feed pump for fire suppression systems.

Specifications: The pump features a 12-inch discharge and can handle flows up to 8500 GPM with heads reaching 110 feet. It is equipped with a balanced high-efficiency two vane closed channel impeller capable of passing 5-inch semi-solids. The pump is driven by a variable speed hydraulic drive, allowing for a wide range of performance.

Construction: The pump body, impeller, and wear ring are made of ductile iron, while the shaft is constructed from 17-4 PH stainless steel. The shaft seal is made of silicon carbide, and the elastomers are standard Buna N.

Operational Features: The pump can be bolted directly into a pipeline or used as a booster pump. It operates with HT100 to HT200 power units or other hydraulic power sources capable of flows between 50 - 90 GPM. The hydraulic drive is safe for use in environments where electric power is hazardous or impractical.

Dimensions and Weight: The pump weighs 979 lbs (444 kg), with a height of 45 inches (114 cm) and a width of 39.5 inches (100 cm).

Connections: The discharge and inlet are both 12-inch, 125# ASA flanges. Hose ports are available in 1-1/4" Code 61 Flange or 1-1/2" NPT (F).

Performance: The pump operates at a maximum input flow of 90 GPM (340 LPM) and a maximum operating pressure of 3000 PSI (204 Bar). It requires hydraulic oil with a viscosity of 214-320 s.s.u. at 100°F (64°C).

Catalog excerpts

HYDRA-TECH PUMPS MODEL S6300 12” (30 cm) Discharge The S6300 is a highly efficient, high volume, solids handling pump. Typical uses for this pump would be sewer by-pass, barge transfer, municipal waste lagoon and tank pumping. Also used as a high volume feed pump for fire suppression systems. Heads to 110 feet and flows to 8500 GPM. SPECIFICATIONS • Balanced High Efficiency Two Vane Closed Channel Impeller • Will pass 5" (12 cm) semi-solids • Variable Speed hydraulic drive provides a wide range of performance • Oil Lubricated Seals (can run dry) • High Efficiency Balanced Vane hydraulic motor • Can be bolted directly into a pipeline or used as a booster pump • Safe Hydraulic Drive can be used where electric power is hazardous or impractical • Operates with our HT100 to HT200 power units or other hydraulic power sources capable of flows of 50 - 90 GPM Specifications are subject to change without notice 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]

Open the catalog to page 1

Curves are based on pumping water at 60UF. For performance curves other than shown above, consult factory. 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]

Open the catalog to page 2