HYDRA-TECH PUMPS MODELS S6250 10 ” (25 cm) Discharge The S6250 is a Solids Handling Effluent Pump for use on jobs such as waste treatment, sewer by-pass, barge transfer, municipal lift stations and tank pumping. Heads to 190 feet and flows to 5000 GPM. • Balanced High Efficiency Two Vane Closed Channel Impeller • Will pass 4" (10 cm) semi-solids • Variable Speed hydraulic drive provides a wide range of performance • Oil Lubricated Seals (can run dry) • High Efficiency Balanced Vane hydraulic motor • Can be bolted directly into a pipeline or used as a booster pump • Safe Hydraulic Drive can be used where electric power is hazardous or impractical • Operates with our HT100 to HT200 power units or other hydraulic power sources capable of flows of 50 - 90 GPM Specifications are subject to change without notice 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]

CAPACITY Curves are based on pumping water at 60°F. For performance curves other than shown above, consult factory. 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]