HYDRA-TECH PUMPS MODELSS6150 6” (15 cm) Discharge The S6150 is a High Performance Solids Handling Pump for use on jobs where higher heads or long discharge runs are encountered such as lift stations, ship offloading, mine and quarry de-watering. Heads to 310 feet, flows to 2450 GPM. FEATURES SPECIFICATIONS • Balanced High Efficiency Two Vane Closed Channel Impeller • Will pass 3" (8 cm) semi-solids • Variable Speed hydraulic drive provides a wide range of performance • Oil Lubricated Seals (can run dry) • High Efficiency Balanced Vane hydraulic motor • Can be bolted directly into a pipeline or used as a booster pump • Safe Hydraulic Drive can be used where electric power is hazardous or impractical • Operates with our HT100 to HT200 power units or other hydraulic power sources capable of flows of 50 - 90 GPM Specifications are subject to change without notice 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]

Curves are based on pumping water at 60°F. For performance curves other than shown above, consult factory. 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]