*mydirectindustry

S4SHRLP

Product catalog summary

Overview: The S4SHR-LP is a compact hydraulic submersible shredder pump designed for efficient waste management in municipal, industrial, agricultural, and institutional applications. Its narrow design allows it to fit through most manholes, making it versatile for various environments.

Features: The pump features a 360° shredding action with an open-vane shredder impeller equipped with a tungsten carbide cutting tip. It includes a hardened macerator suction plate and oil-lubricated seals that can operate dry. The hydraulic drive is variable speed, reaching up to 2000 rpm, and is safe for use in hazardous or impractical electric power situations.

Specifications: The S4SHR-LP weighs 225 lbs (102 kg) and measures 28 inches in height and 21.5 inches in width with the discharge elbow. It handles solids up to 3.5 inches (9 cm) and has a 4-inch NPT(F) discharge. The pump body and impeller are made of ductile iron, while the shredder blade is tungsten carbide. The shaft is stainless steel with carbon/ceramic and silicon carbide seals. It operates with hydraulic oil of 214-320 s.s.u. at 100°F (64°C), with a maximum input flow of 15 GPM (57 LPM) and a maximum operating pressure of 3000 PSI (204 Bar).

Power Source: The pump is compatible with any open center hydraulic system, specifically designed to operate with HT16 to HT35 power units or other hydraulic power sources capable of flows of 10 - 15 GPM.

Catalog excerpts

4” HYDRAULIC SUBMERSIBLE SHREDDER PUMP MODELS S4SHR-LP 4” (10 cm) Discharge The S4SHR-LP is a narrow version of the S4SHR. At only 21.5 inches wide it will fit through most manholes. This pump is designed to continuously rip and shear solids with a 360° shredding action. Great for municipal , industrial, agricultural and institutional waste applications. Open-Vane Shredder Impeller with Tungsten Carbide Cutting Tip Hardened Macerator Suction Plate Oil Lubricated Seals (can run dry) Variable Speed hydraulic drive to 2000 rpm Will Fit Into 22” Manholes Safe Hydraulic Drive can be used where electric power is hazardous or impractical Dependable gear type hydraulic motor Operates with our HT16 to HT35 power units or other hydraulic power sources capable of flows of 10 - 15 GPM Specifications are subject to change without notice 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail:

Open the catalog to page 1

Curves are based on pumping water at 60'T. For performance curves other than shown above, consult factory. 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]

Open the catalog to page 2