4” HYDRAULIC SUBMERSIBLE CENTRIFUGAL SCREW PUMP MODEL S4SCR 4” (10 cm) Discharge The S4SCR is ideal for pumping high viscosity liquids such as crude oils, latex, molasses and refinery wastes using a positive displacement screw. When pumping lighter materials, the impeller acts as a centrifugal type providing high volume outputs. Unique Centrifugal Screw Impeller for pumping of liquids with higher viscosities Small Overall Size allows for use in confined spaces Oil Lubricated Seals (can run dry) Can be used inline as a booster pump Safe Hydraulic Drive can be used where electric power is hazardous or impractical Operates with our HT16 to HT35 power units or other hydraulic power sources capable of flows of 7 - 12 GPM High Efficiency bent axis motor 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: ht

Optional 4 Flange Adapter Hydraulic Hose Ports Axial Piston Hydraulic Motor Abrasion Resistant Shaft Seal Centrifugal Screw Impeller Liters/M mute Curves are based on pumping water at 60“F For performance curves other than shown above, consult factory. 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]