*mydirectindustry

MODEL S3TC

Product catalog summary

Overview: The document provides technical specifications and features of the S3TC and S3TCDI hydraulic submersible utility pumps, designed for versatile applications such as construction sites, manhole pumping, and oil skimming. These pumps are available with either an aluminum or ductile iron body.

Features:

Stainless Steel Channel Impeller for efficient performance.
Oil Lubricated Seals allowing the pump to run dry.
Variable Speed Hydraulic Drive for flexibility.
Compact size suitable for tight spaces.
Can be mounted directly to a tank or truck.
Operates with HT11 to HT13 power units or other hydraulic sources with 5-8 GPM flow.
Dependable gear type hydraulic motor.

Specifications:

Weight: S3TC - 28 lbs (13 kg), S3TCDI - 52 lbs (24 kg).
Dimensions: Height - 14" (36 cm), Width - 11 3/4" (30 cm).
Discharge: 3" NPT(F).
Inlet Flange: 3" 125# ASA.
Solids Handling Capacity: 3/4" (2 cm).
Hose Ports: 1/2" NPT (F).
Pump Body: S3TC - Aluminum, S3TCDI - Ductile Iron.
Impeller: Stainless Steel.
Wear Ring: Ductile Iron.
Wear Plate: Steel.
Shaft: Plated 4140 Steel.
Shaft Seal: Carbon/Ceramic (Standard).
Elastomers: Buna N (Standard).
Hydraulic Oil: 214-320 s.s.u. @ 100°F (64°C).
Input Flow: Max. 8 GPM (30 LPM).
Operating Pressure: Max. 2500 PSI (170 Bar).
Power Source: Any Open Center Hydraulic System.

Additional Information: The pump's hydraulic drive is safe for use in environments where electric power is hazardous or impractical. A stainless steel model is also available.

Catalog excerpts

3” HYDRAULIC SUBMERSIBLE UTILITY PUMP MODELS S3TCDI (Ductile Iron Body) S3TC (Aluminum Body) 3” (7 cm) Discharge The S3TC is a very portable and versatile all purpose utility pump designed for pumping jobs like construction sites, manhole pumping and oil skimming. An efficient channel impeller offers excellent overall performance. This pump is offered in your choice of aluminum or ductile iron body. Stainless Steel Channel Impeller Oil Lubricated Seals (can run dry) Variable Speed hydraulic drive Small overall size for use in tight spaces Can be bolted directly to a tank or truck Safe hydraulic drive can be used where electric power is hazardous or impractical Dependable gear type hydraulic motor Operates with our HT11 to HT13 power units or other hydraulic power sources capable of flows of 5-8 GPM Stainless Steel model available 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail:

Open the catalog to page 1

Curves are based on pumping water at 60°F. For performance curves other than shown above, consult factory. 167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061 Website: www.hydra-tech.com E-Mail: [email protected]

Open the catalog to page 2