1. Catalogs
  2. HYDRA a.s
  3. Capacitors for Fluorescent and Gas Discharge Lamps

Capacitors for Fluorescent and Gas Discharge Lamps

Capacitors for Fluorescent and Gas Discharge Lamps
1 / 12 PagesView full catalog

Capacitors for Fluorescent and Gas Discharge Lamps

Product catalog summary
Overview: This document outlines the technical specifications and guidelines for Hydra capacitors used in fluorescent and gas discharge lamps. It includes details on applications, compensation methods, safety features, installation, operation, and disposal.
Applications: Fluorescent and gas discharge lamps require igniters and ballasts, which cause reactive power affecting the power factor. Capacitors are used to provide capacitive reactive power, improving efficiency.
Compensation Methods:
  • Parallel Compensation: Capacitors are connected in parallel to the mains for each lamp circuit, designed for rated voltage.
  • Series Compensation: Capacitors in series overcompensate inductive reactive power, allowing compensation of a second circuit, handling higher voltages.
Capacitance Values: Specified by manufacturers based on lamp and ballast types.
General Specifications: Hydra capacitors are self-healing with overpressure disconnectors, available for various voltages and temperature ranges, certified for safety, with a minimum lifetime of 30,000 hours.
Safety Features: Include an overpressure disconnector for safe disconnection in case of failure, meeting safety standards.
Installation and Operation: Capacitors can be mounted vertically or horizontally with a minimum clearance of 12 mm, operating within specified temperature ranges.
Discharge and Disposal: Capacitors retain charge after power-off and must have discharge resistors. They do not contain hazardous materials and must be disposed of according to local regulations.
Product Specifications:
  • Construction: Made from metallized polypropylene with an aluminum casing, filled with environmentally friendly vegetable oil.
  • Features: Include safety features like an overpressure disconnector, self-healing properties, impulse resistance, and a low dissipation factor.
  • Compliance: Conforms to EN 61048/49, safety class B.
Technical Specifications:
  • Rated Voltage: 250 V AC for parallel capacitors, 480-500 V AC for series capacitors.
  • Rated Frequency: 50 Hz / 60 Hz.
  • Capacitance Tolerance: ± 5% for parallel capacitors, ± 4% (± 2% on request) for series capacitors.
  • Max Operating Voltage: 1.1 times the nominal voltage (UN).
  • Max Operating Current: 1.3 times the nominal current (IN).
  • Test Voltage: Terminal to terminal: 2.0 times UN; Terminal to case: 3.6 kV.
  • Creepage and Clearance: ≥ 8 mm and ≥ 6 mm respectively.
  • Mounting: Various options based on can diameter, with specified torque limits.
  • Temperature Range: -40°C to +100°C for certain capacitances, -25°C to +85°C for others.
  • Life Time: 30,000 hours.
  • Installation: Indoor, with optional mounting positions.
  • Protection Class: IP 00 for soldering tags, IP 20 for push-wire connectors.
Ordering Information: Capacitors are available in various capacitances and dimensions, with specific order codes for versions with and without metal studs. Custom options are available upon request.
Contact Information: For sales and inquiries, contact Hydra Components GmbH in Berlin, Germany.
See more

Catalog excerpts

Capacitors for Fluorescent and Gas Discharge Lamps-1

Kondensatoren fur Leuchtstoff- und Entladungslampen Capacitors for Fluorescent and Gas Discharge Lamps

 Open the catalog to page 1
Capacitors for Fluorescent and Gas Discharge Lamps-2

Hydra Kondensatoren für Leuchtstoff- und Entladungslampen Anwendungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Parallelkompensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Reihenkompensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Kompensation von Entladungslampen . . . . . . . . . . . . . . . . . . . . .4 Kapazitätswerte für Reihen- und Parallelkompensation . . . . . . . . . . . . . . . . . . . . . . . .4 Allgemein . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

 Open the catalog to page 2
Capacitors for Fluorescent and Gas Discharge Lamps-3

Hydra-Kondensatoren für Leuchtstoffund Entladungslampen MKP-Si-Technologie Hydra Capacitors for Fluorescent and Gas Discharge Lamps MKP-Si-technology Anwendungen Leuchtstoff- und Entladungslampen benötigen für die Zündung und den Betrieb Starter und Vorschaltgeräte. Nach dem Zündvorgang werden die Vorheiz- und Betriebsströme der Leuchtstoff- und Entladungslampen durch induktive Vorschaltgeräte begrenzt. Diese induktiven Vorschaltgeräte verursachen nennenswerte induktive Blindleistungsanteile. Der Leistungsfaktor kann abhängig von der Lampenleistung Werte von 0,3 bis 0,5 annehmen. Applications...

 Open the catalog to page 3
Capacitors for Fluorescent and Gas Discharge Lamps-4

Hydra-Kondensatoren für Leuchtstoffund Entladungslampen MKP-Si-Technologie Hydra Capacitors for Fluorescent and Gas Discharge Lamps MKP-Si-technology Reihenkompensation Bei der Reihenkompensation wird die Blindleistung des induktiven Vorschaltgerätes eines Lampenkreises durch einen in Reihe geschalteten Kondensator soweit überkompensiert, dass der Blindleistungsanteil eines zweiten Lampenkreises mit Vorschaltgerät abgedeckt wird. Durch das Zusammenschalten beider Lampenkreise in eine Duo-Schaltung wird die Blindleistung kompensiert. Reihenkondensatoren müssen für eine höhere Spannung als die...

 Open the catalog to page 4
Capacitors for Fluorescent and Gas Discharge Lamps-5

Hydra-Kondensatoren für Leuchtstoffund Entladungslampen MKP-Si-Technologie Hydra Capacitors for Fluorescent and Gas Discharge Lamps MKP-Si-technology Allgemein Hydra Kondensatoren für Leuchtstoff- und Entladungslampen sind selbstheilende Kondensatoren mit Überdruckabschalter (Typ B gemäß EN 61048) für Reihen- oder Parallelkompensation. Hydra Kondensatoren für Reihen- und Parallelkompensation sind für folgende Nennspannungen und Temperaturbereiche lieferbar: Kondensatoren für Parallelkompensation 250 V; 50/60 Hz; - 40°C ... + 85°C / 100°C Kondensatoren für Reihenkompensation 480 V; 50/60 Hz; -...

 Open the catalog to page 5
Capacitors for Fluorescent and Gas Discharge Lamps-6

Hydra-Kondensatoren für Leuchtstoffund Entladungslampen MKP-Si-Technologie Hydra Capacitors for Fluorescent and Gas Discharge Lamps MKP-Si-technology Betrieb Hydra Kondensatoren für Reihen- und Parallelkompensation sind innerhalb der in den Auswahltabellen angegebenen Temperaturbereiche unter Beachtung der Eigenerwärmung der Kondensatoren zu betreiben. Operation Hydra capacitors for series and parallel compensation are to be operated within the temperature ranges as mentioned in the selection tables by taking into account of the self-heating of the capacitor. Entladung Nach dem Abschalten von...

 Open the catalog to page 6
Capacitors for Fluorescent and Gas Discharge Lamps-7

Hydra-Kondensatoren für Leuchtstoffund Entladungslampen MKP-Si-Technologie Hydra Capacitors for Fluorescent and Gas Discharge Lamps MKP-Si-technology code system II Varianten der Abmessungen variation of dimension Reihe series Nennkapazität in µF rated capacitance in µF MKP = Metallisierter Kunststoff (Polypropylen) MKP = metallized polypropylene Leerstelle = ohne Bolzen space = without stud B = Metallbolzen B = metal mounting stud S = Schnellbefestigung S = snap-in connection A = Flachstecker A = faston F = Lötöse F = soldering tags L = Leuchtstofflampenkondensator L = capacitor for fluorescent...

 Open the catalog to page 7
Capacitors for Fluorescent and Gas Discharge Lamps-8

Hydra Parallel-Kondensatoren fur Leuchtstoff- und Entladungslampen MKP-Si-Technologie Reihe 255 Hydra Parallel-Capacitors for Fluorescent and Gas Discharge Lamps MKP-Si-technology series 255 Aufbau ■ Metallisiertes Polypropylen ■ Aluminiumgehause mit/ohne Metallbolzen ■ umweltfreundliches Fullmittel (Pflanzenol) Merkmale ■ Sicherheit durch Uberdruckabschalter ■ Selbstheilung ■ Impulsfestigkeit ■ niedriger Verlustfaktor ■ geprufte Sicherheit durch 100%ige Stuckprufung Prufzeichen Hydra-Parallel-Kondensatoren in MKP-Si-Technologie fur Leuchtstoff- und Entladungslampen entsprechen der EN 61048/49,...

 Open the catalog to page 8
Capacitors for Fluorescent and Gas Discharge Lamps-9

Hydra Parallel-Kondensatoren fur Leuchtstoff- und Entladungslampen MKP-Si-Technologie Reihe 255 Hydra Parallel-Capacitors for Fluorescent and Gas Discharge Lamps MKP-Si-technology series 255 Andere Kapazitaten und Abmessungen auf Anfrage Other capacitances and dimensions on request approved marks Hinweis ■ Standardlieferumfang bei Typ LFB MKP: Mutter und Zahnscheibe lose mitgeliefert note ■ standard scope of delivery for type LFB MKP: nut and washer included

 Open the catalog to page 9
Capacitors for Fluorescent and Gas Discharge Lamps-10

Hydra Reihen-Kondensatoren fur Leuchtstoff- und Entladungslampen MKP-Si-Technologie Reihe 480 Hydra Series Capacitors for Fluorescent and Gas Discharge Lamps MKP-Si-technology series 480 Aufbau ■ Metallisiertes Polypropylen ■ Aluminiumgehause mit/ohne Metallbolzen ■ umweltfreundliches Fullmittel (Pflanzenol) Merkmale ■ Sicherheit durch Uberdruckabschalter ■ Selbstheilung ■ Impulsfestigkeit ■ niedriger Verlustfaktor ■ geprufte Sicherheit durch 100%ige Stuckprufung construction ■ metallized polypropylene ■ aluminium can with/without metal stud ■ environmentally-friendly filling (vegetable oil)...

 Open the catalog to page 10
Capacitors for Fluorescent and Gas Discharge Lamps-11

Hydra Reihen-Kondensatoren fur Leuchtstoff- und Entladungslampen MKP-Si-Technologie Reihe 480 Hydra Series Capacitors for Fluorescent and Gas Discharge Lamps MKP-Si-technology series 480 480 Bestellbezeichnung (ohne Metallbolzen) LFB MKP 1,0 1,4 1,7 Andere Kapazitaten und Abmessungen auf Anfrage Other capacitances and dimensions on request approved marks EN 61048/49 safety class B Hinweis ■ Standardlieferumfang bei Typ LFB MKP: Mutter und Zahnscheibe lose mitgeliefert note ■ standard scope of delivery for type LFB MKP: nut and washer included

 Open the catalog to page 11
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.