*mydirectindustry

Catalogs
Huvema B.V.
LTC DR 750G-2

LTC DR 750G-2

Product catalog summary

Overview: The LTC DR 750 G is a metal lathe suitable for both workshop and hobby use. It features a full gear transmission for the main shaft, enhancing power transfer at low revolutions compared to variable drives. Speed changes are conveniently managed via a switch on the front of the switch box, eliminating the need for belt adjustments.

Specifications:

Swing over cross slide: 195 mm
Swing over bed: 320 mm
Distance between centres: 750 mm
Hole through spindle: 38 mm
Engine power: 1.1 kW
Voltage: 230 V
Taper of main spindle: MT5
Dimensions: 1400 x 700 x 620 mm
Weight: 320 kg

Threading Capabilities:

Metric threading: 0.2 - 7 mm
Inch threading: 2.5 - 48 inch
Threading module: 0.2 - 3.5 mm
Threading pitch: 8-120

Features: The lathe includes induction hardened and ground prism bed, CE certification, and a fully geared power supply box for feed speed and thread pitch adjustments. It comes standard with a three-jaw and four-jaw chuck, chip tray, rear shield, frame, long and cross feed, a 4-turn chisel holder, fixed and moving glasses, LED lighting, and a separate emergency stop. An accessory box with change wheels, fixed centers, and an oil sprayer is also included.

Optional Accessories: A quick change tool holder is available as an optional accessory.

Catalog excerpts

Lathe machine 320x750 mm 15436 Model LTC DR 750G-2 EAN 8718242560139 Metal lathe LTC DR 750 G. Suitable for workshop and hobby. Full gear transmission of main shaft. This increases the power to be transferred in the low revs compared to the variably driven main shaft. Also an advantage is the change of speed. This is done at the front of the switch box by means of a switch. shift levers. So no need to move a belt. Directly available

Open the catalog to page 1

Transport Article number 15436 Barcode 8718242560139 Product group Machines Volumetric weight 10000 Net weight 320 HS code 84581900 Technical specifications Swing over cross slide 195 mm Swing over bed 320 mm Distance between centres 750 mm Hole through spindle

Open the catalog to page 2

38 mm Engine power 1,1 kW Digital readout No Tail stock taper MT3 Tailstock spindle travel 80 mm Threading metric 0,2 - 7 (22x) mm/omw Threading inch 2,5-48 (45x) inch Threading module 0,2 - 3,5 (31x) mm Threading pitch 8-120 (31x) Cross travel support 200 mm Speed range 0,05-0,35 (12x) mm/omw Top slide travel 120 mm Longitudinal feed 90-1800 omw/min Voltage 230 V

Open the catalog to page 3

Taper of main spindle MT5 Dimensions l x b x h 1400 x 700 x 620 mm Machine dimensions (with base) 145 x 75 x 130 cm Packaging dimensions (with 2 boxes base) 153 x 77 x 116 cm Weight 320lathe kg LTC DR 750 G. Metal Suitable for workshop and hobby. Full gear transmission of main shaft. This increases the power to be transferred in the low revs compared to the variably driven main shaft. Also an advantage is the change of speed. This is done at the front of the switch box by means of a switch. shift levers. So no need to move a belt. Furthermore, the power supply box is completely equipped with...

Open the catalog to page 4

Quick change tool holder

Open the catalog to page 5

LTC DR 750G-2

LTC DR 750G-2

Catalog excerpts

All Huvema B.V. catalogs and technical brochures