UltraSync Hot Runner TechnologyConsistent part filling, excellent gate quality and close nozzle spacing Benefits • 100% gate open and close synchronization from cavity-to-cavity • Improves system balance • Optimized stem force to achieve excellent gate vestige • 100% repeatability from shot- to-shot • Minimized pitch spacing • Improved reliability andreduced wear • Applicable for low and high cavitation molds up to 192 drops Features • Plate actuation • Sophisticated alignment components minimize wear • Easy set-up and operation • Stem position monitoring • Simple integration in mold design • Profiled stem movement • Individual cavity shut down • Safety features to avoid gate damage Husky UltraSync™ technology offers repeatable shot-to-shot and part-to-part consistency through precise stem closing, helping remove variation from the injection molding process. The precision of UltraSync technology is achieved by using either an electric servo motor option, hydraulic cylinder option or pneumatic cylinder option that moves the valve stems with 100% synchronization. In combination with its servo motor the electric option (UltraSync-E) is ideally suited for clean room applications and all electric machines. If the servo motor is used, the set-up screen is conveniently integrated into a Husky Altanium® temperature controller. Electric, hydraulic and pneumatic options are configured to provide optimized force for excellent gate quality. The plate actuation mechanism is built for reliability and limited wear. Ball and linear bearings ensure longevity. Accessibility to perform routine maintenance tasks is simple and easy. For example, stems on the UltraSync-E can be exchanged in the machine in under five minutes. UltraSync technology is available with Ultra 350, Ultra 500 and Ultra 750 valve gate hot runner nozzles. A wide range of melt channel sizes and gating options ensures that the system is optimized for your specific resin and application. UltraSync technology allows for a minimum nozzle spacing of 18 mm (0.71") with Ultra 350 nozzles and is an ideal solution for the high precision molding of small parts with less than one gram part weight.

UltraSync technology has unique and patented features making this the best choice for customers considering plate actuation: • Patent pending shear pin design disengages the stem if too much force is applied in the gate area • Patent pending maintenance position for easy access to the valve stems in the machine • Integration of the servo control into a Husky Altanium controller not only allows for one operator screen instead of two, but also contains a safety feature that prevents the servo from moving unless the system is at operating temperature UltraSync-E Electric plate actuation solution...