The Ultra 250 nozzle is ideal for small, space constrained parts and inside-gating applications with throughputs up to 10 grams/sec. Hottipgating options accommodate most commodity and engi- neering resins. • 12.5 mm diameter (0.490") nozzle bore • 7.0 mm diameter (0.276") nozzle sealoff • Maximum injection pressure is 1586 bar (23 kpsi) • Minimum pitch spacing of 18 mm (0.71") • Three year leakproof guarantee with UltraSeal9 The Ultra 250 nozzle is designed for small part molding for through- puts up to 10 grams per second and is ideal for small medical, closure and technical parts. The reduced size of the nozzle and tip allow for direct gating near cavity and core pins and on difficult to access areas of parts that typica My would requirea cold runner. The minimum drop to drop spacing allows for tighter cavity spacing and smaller mold bases. The Ultra 250 nozzles can be used for polyolefin and engineering grade resins,and can be used in combination with other Ultra noz- zle sizes in multi-material molds. All Husky hot runners come with a threeyear leakproof guarantee. Gating options Throughput (grams/second) O Requires Review B Blend Keeping our customers in the lead

Pitch spacing Hottip pitch spacing • Nozzles can be grouped in maximum clusters of eight • For applications that exceed 16 drops contact a Husky hot runner • Tighter pitch layouts may be available, contact Husky for more Note:The sprue minimum radius 31.8 mm (1.25") and the Xand Y minimum distances mustall be satisfied. Xand Y must be greaterthan 45.0 mm (1.77") Note: Minimum distance between outermost nozzle drop center to outer side edge of the manifold plate is 75 mm (2.95"). Minimum distance between outermost nozzle drop center to outer top and bottom edge of manifold plate is 100mm (3.93")....