PowerPro G
2Pages

Catalog excerpts

PowerPro-G Reducing energy and improving overall efficiency in G-PET machines Auto Lube Normal Lube Trigger Cycles Between Auto Lube Cycles Since Last Lube Cycle MACHINE SETUP Auto Lube Normal Lube Trigger Cycles Between Auto Lube Cycles Since Last Lube Cycle Machine Mode Normal Dry Cycle Machine Mode Mold Set Normal Dry Cycle Normal Shutheigtht Adjust Mold Set Normal Shutheigtht Adjust Use Mold Open andClose Close Mold Use Mold Open and Mold Energy Saving Energy Saving PowerPro-G is completely controlled through the G-PET HMI screen. Features • Accurate energy auditing • Integration with Pro-Act™ diagnostics • Software upgrades during maintenance • Proven technology • Part quality maintained Benefits • Reduced energy and operating costs • Process optimization • Payback between 1 to 2 years • Improved productivity • Reduced carbon footprint Energy Saving Active Energy Saving Energy can be one of the biggest costs in the injection molding process. Just as resin and labor should be monitored, energy consumption should be controlled and where possible reduced. Older machines are particularly susceptible to inefficiencies that can reduce system productivity. PowerPro-G™ is Husky’s adaptive control energy management software that can improve process optimization and reduce energy consumption by upto 12% in G-PET machines. What is PowerPro-G? PowerPro-G is energy management software designed specifically for G-PET machines. It uses control algorithms that adapt to the needs of the injection molding machine and optimizes the control of the system’s hydraulic pumps. PowerPro-G adaptive control was developed by analyzing data from thousands of operational G-PET machines. Husky engineers used this data to optimize control algorithms during the injection phase of the process cycle. Each implementation is tailored to the specific system being optimized.

Open the catalog to page 1

Qualified Husky technicians establish a system’s energy baseline before the software is installed, providing system owners with immediate feedback about the energy improvements achieved by installing PowerPro-G software. Many factors can influence the effectiveness of this upgrade. Under regular processing conditions energy saving results can vary depending on the specifics of the injection molding machine. The condition of the machine’s hydraulic system is critical as oil leakage, pressure loss, high backpressure due to dirty filters and unclean hydraulic fluid all contribute to energy...

Open the catalog to page 2