WELD PURGE MONITOR™ HUNTINGDON FUSION TECHNIQUES LIMITED HUNTINGDON FUSION TECHNIQUES The PurgEye™ 300 Weld Purge Monitor™ has been specifically designed for indicating low oxygen levels in Argon gas for weld purging. It is believed to be the worlds first purpose designed and built Titanium Weld Purge Monitor. It measures and clearly indicates actual oxygen levels down to 10 parts per million on a large alpha-numeric The unit is menu driven by four push buttons on the front panel and has an internal alarm with high and low oxygen levels which can be set with those buttons. A unique new low cost sensor is used which has very little maintenance requirement and is guaranteed • Small, light, portable and comparatively inexpensive. • Integrally mounted sensor to eliminate electrical • Automatic fault finding diagnostics. • Specifically developed for weld purging of titanium. • Low repair, refurbishment and recalibration costs. • Operation with orbital welders, welding enclosures, pipe welding and chamber welding. • Ideal for welding stainless steel in ultra clean An optional PurgeLog™ software package is available to allow a computer to be used to store and print results and graphs etc for quality control purposes. • No pump needed and no moving parts to fail. • Weld Start/Stop Facility.

PurgEye™ 500 Weld Purge Monitor™ connected via computer interface to PurgeLog™ software PurgEye™ 100 WELD PURGE MONITOR™ Specification • Operating Voltage 115/230 v single phase 50/60 hz. • RS232 port for Computer interface. • PurgeLog™ Data Logging Software* (optional). • User interface for external alarm, high/low ppm settings, on/off welder switching etc. • Operating buttons sealed to IP65 standard. • Two minute warm up time only. • Switchable facility for readings in ppm or percentage. • Power consumption 18 w. • Dimensions: 250 mm x 250 mm x 100 mm. • Accuracy: +/- 2% of scale reading. Low...