- Catalogs
- Hunan SonnePower International Co., Ltd.
- Keypad SPM-KEYP-Q08
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Keypad SPM-KEYP-Q08
Keypad SPM-KEYP-Q08
- Keys and Indicators: 8 keys, 1 digital output (DO), 24 high bright LED indicators with adjustable brightness.
- Working Voltage: 8 to 32 V DC.
- Housing and Installation: Plastic housing with silicone panel, dimensions 111.1×68.1×39.1 mm, embedded installation using 2 M6×20 screws with recommended torque < 1Nm.
- Connector: 5 pin M12 A code, matched female connector.
- Weight: 0.12 kg.
- Temperature Range: Operating and storage temperature from -40 to 85 ℃.
- Protection Class: IP65/IP67 with cable.
- Key Life: Mechanical key life of 500,000 times.
- Output: 1 DOH, high side output with max rated drive current of 1.5A, built-in freewheeling diode.
- Current Consumption: ≤ 100mA at 24 V without external load.
- CAN Interface: CAN 2.0 A/B, baud rate from 20 kbits/s to 1 Mbits/s (default 250 kbits/s), Node ID 0x01, user-defined communication protocol.
- Processor: 32-bit high-performance MCU.
- Complies with GB/T 17626.4-2008/IEC61000-4-4: 2004, GB/T 17626.5-2008/IEC61000-4-5: 2005, GB/T 17626.2-2006/IEC61000-4-2: 2001.
- Pin 01: UEE Power positive (8...32 V DC).
- Pin 02: GND Power ground.
- Pin 03: CANH (CAN bus high).
- Pin 04: CANL (CAN bus low).
- Pin 05: Q00 DOH (high side output).
Catalog excerpts
Operation Panel 1 CAN 8 keys, 1 DO Working Voltage 8...32 V DC Plastic housing + Silicone panel (hemlines for lower surface mounting) 2 * M6× 20 screws，embedded installation, recommended torque < 1Nm Working temperature Storage temperature Protection class 24 high bright LED (8 groups RGB monochrome) Indicator light High bright LED ，brightness adjustable 1 DOH ，high side output，Max. Rated drive current 1.5A， which can drive load directly， built-in freewheeling diode Current consumption ≤ 100mA (24 V without external load at 24 V ) CAN interface Baud rate Node ID Communication protocol CAN 2.0 A/B 20 kbits/s... 1 Mbits/s (default 250 kbits/s ) 0x01 User defined Definition table of connectors Pin Function Description Power positive 01 UEE Power ground 02 GND CAN bus (high) 03 CANH CAN bus(low) 04 CANL 05 Matched female connector SonnePower • Remark 8...32 V DC CAN communication，no builtin terminating resistor by default unless otherwise specified High side output, built-in freewheeling diode
Open the catalog to page 1Archived catalogs
Keypad SPM-KEYP-A171 Page
HMI keypad SPM-KEYP-Q121 Page
Keypad SPM-KEYP-A121 Page
Keypad SPM-KEYP-C081 Page
Keypad SPM-KEYP-B081 Page
Keypad SPM-KEYP-A081 Page
HMI SPD-070-Cx Series1 Page
- Display module
- LCD display panel
- Industrial display panel
- TFT display module
- Digital I/O
- IO module
- Color display panel
- Touch screen display panel
- Analog I/O
- Digital IO module
- Control display system
- Backlit display panel
- Fieldbus I/O module
- Programmable logic controller
- LED-backlit display panel
- Programmable display system
- Analog IO module
- Outdoor display panel
- Panel-mount keypad
- Custom display panel