Keypad SPM-KEYP-C08

Keypad SPM-KEYP-C08

Product catalog summary
Specifications:
  • Working Voltage: 8...32 V DC
  • Dimensions: 105.1×62.1×39.1 mm
  • Weight: 0.12 kg
  • Working Temperature: -40...85 ℃
  • Storage Temperature: -40...85 ℃
  • Protection Class: IP65/IP67 (with cable)
Components:
  • Keys: 8 Silicone keys, 500,000 times mechanical life
  • LEDs: 24 high bright LED (8 groups RGB monochrome), brightness adjustable
  • Output: 1 DOH, high side output, max rated drive current 1.5A, built-in freewheeling diode
Installation:
  • 2 * M6×20 screws, embedded installation, recommended torque < 1Nm
Connector:
  • 5 pin M12 A code
  • Matched female connector 5 pin M12 female A code cable
Electrical Characteristics:
  • Current Consumption: ≤ 100mA (without external load at 24 V)
  • CAN Interface: CAN 2.0 A/B
  • Baud Rate: 20 kbits/s... 1 Mbits/s (default 250 kbits/s)
  • Node ID: 0x01
  • Communication Protocol: User defined
  • Processor: 32-bit high performance MCU
Standards and Compliance:
  • GB/T 17626.4-2008/IEC61000-4-4: 2004
  • GB/T 17626.5-2008/IEC61000-4-5: 2005
  • GB/T 17626.2-2006/IEC61000-4-2: 2001
Pin Function Description:
  • 01 UEE: Power positive 8...32 V DC
  • 02 GND: Power ground
  • 03 CANH: CAN bus(high), no built-in terminating resistor by default
  • 04 CANL: CAN bus(low)
  • 05 Q00: DOH High side output, built-in freewheeling diode
See more

Catalog excerpts

Keypad SPM-KEYP-C08-1

Operation Panel 1 CAN 8 keys, 1 DO Working voltage 8...32 V DC Plastic housing+Silicone panel 2 * M6× 20 screws,embedded installation,recommended torque < 1Nm Working temperature Storage temperature Protection class 500000 times (Mechanical keys) 24 high bright LED (8 groups RGB monochrome) Indicator light High bright LED ,brightness adjustable Back light 1 DOH ,high side output,Max. Rated drive current 1.5A, which can drive load directly,built-in freewheeling diode Current consumption ≤ 100mA (without external load at 24 V ) CAN interface Baud rate Node ID Communication protocol CAN 2.0 A/B 20 kbits/s... 1 Mbits/s (default 250 kbits/s ) 0x01 User defined Definition table of connector Pin 01 02 03 04 Function UEE GND CANH CANL Descr iption Power positive Power ground CAN bus(high) CAN bus(low) Matched female connector SonnePower • Remar k 8...32 V DC CAN communication,no builtin terminating resistor by default unless otherwise specified High side output, built-in freewheeling diode

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.