Keypad SPM-KEYP-B08

Keypad SPM-KEYP-B08

Product catalog summary
Specifications:
  • Working Voltage: 8...32 V DC
  • Dimensions: 105.1×62.1×39.1 mm
  • Weight: 0.12 kg
  • Working and Storage Temperature: -40...85 ℃
  • Protection Class: IP65
Components:
  • 1 CAN interface
  • 7 keys + 1 knob (with button)
  • 1 DO (Digital Output)
  • 24 high brightness LED (8 groups of RGB monochrome)
Installation:
  • Embedded installation with 2 * M6×20 screws
  • Recommended torque: <1Nm
Electrical Characteristics:
  • Current Consumption: ≤ 100mA (without external load at 24 V)
  • Output: 1 DOH, high side output, max. rated drive current 1.5A
Communication:
  • CAN Interface: CAN 2.0 A/B
  • Baud Rate: 20 kbits/s... 1 Mbits/s (Default 250 kbits/s)
  • Node ID: 0x01
  • Communication Protocol: User defined
Processor:
  • 32-bit high performance MCU
Standards and Compliance:
  • EMC: GB/T 17626.4-2008/IEC61000-4-4: 2004, GB/T 17626.5-2008/IEC61000-4-5: 2005, GB/T 17626.2-2006/IEC61000-4-2: 2001
Connector Definition:
  • Pin 01: UEE Power positive 8...32 V DC
  • Pin 02: GND Power ground
  • Pin 03: CANH CAN bus (high)
  • Pin 04: CANL CAN bus (low)
  • Pin 05: Q00 DOH High side output
See more

Catalog excerpts

Keypad SPM-KEYP-B08-1

Operation Panel 1 CAN 7 keys+ 1 knob(with button) 1 DO Working voltage 8...32 V DC Plastic housing+ Silicone panel Weight Working temperature Storage temperature Protection class 7 silicone keys + 1 knob (with button) Indicator light 24 high brightness LED (8 groups of RGB monochrome) Back light High bright LED ,brightness adjustable 1 DOH ,high side output,max. rated drive current 1.5A, Output Working voltage UEE Current consumption which can drive load directly,built-in freewheeling diode 8...32 V DC ≤ 100mA (Without external load at 24 V ) CAN interface Baud rate Node ID Communication protocol CAN 2.0 A/B 20 kbits/s... 1 Mbits/s (Default 250 kbits/s ) 0x01 User defined Definition table of connectors Pin 01 02 03 04 Function UEE GND CANH CANL Descr iption Remar k Power positive 8...32 V DC Power ground CAN bus(high) CAN communication,no built-in CAN bus(low) terminating resistor by default unless otherwise specified High side output, built-in DOH freewheeling diode Matched female connector SonnePower •

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.