Keypad SPM-KEYP-A08

Keypad SPM-KEYP-A08

Product catalog summary
Specifications
  • Working Voltage: 8...32 V DC
  • Dimensions: 105.1 x 62.1 x 39.1 mm
  • Weight: 0.12 kg
  • Temperature Range: -40...85 ℃ for both working and storage
  • Protection Class: IP65/IP67 with cable
Connectors
  • Pin 01: UEE Power Positive (8...32 V DC)
  • Pin 02: GND Power Ground
  • Pin 03: CANH (CAN bus high)
  • Pin 04: CANL (CAN bus low)
  • Pin 05: Q00 DOH (High-side output with built-in freewheeling diode)
Assembly
  • 2 M6 x 20 screws, embedded installation, recommended torque < 1Nm
Key Features
  • 8 silicone keys with a life of 500,000 mechanical presses
  • 24 high brightness LEDs (8 groups RGB monochrome)
  • Adjustable brightness for high bright LED
Output
  • 1 DOH, high side output, max rated driving current 1.5 A
Communication
  • CAN 2.0 A/B interfaces
  • Baud Rate: 20 kbits/s to 1 Mbits/s (default 250 kbits/s)
  • Node ID: 0x01
  • Communication Protocols: User defined
Processor
  • 32-bit high performance MCU
Standards and Compliance
  • GB/T 17626.4-2008/IEC61000-4-4: 2004
  • GB/T 17626.5-2008/IEC61000-4-5: 2005
  • GB/T 17626.2-2006/IEC61000-4-2: 2001
See more

Catalog excerpts

Keypad SPM-KEYP-A08-1

Operation Panel 1 CAN 8 keys, 1 DO Working voltage 8...32 V DC Plastic housing + silicone panel Weight Working temperature Storage temperature Protection class Indicator light 24 high brightness LEDs (8 groups RGB monochrome) High bright LED, brightness adjustable 1 DOH,high side output,the maximum rated driving current is 1.5 A, which can drive loads directly , built-in freewheeling diode Output Working voltage UEE 8...32 V DC ≤ 100mA (without external load at 24 V DC) Current consumption CAN interfaces Baud rate Node ID Communication protocols CAN 2.0 A/B 20 kbits/s... 1 Mbits/s (default 250 kbits/s ) 0x01 User defined EMC Definition table for connectors Pin 01 02 03 04 Function UEE GND CANH CANL Description Power Positive Power ground CAN bus(high) CAN bus(low) Matched female connector SonnePower • panel • Changsha Remark 8...32 V DC CAN communication, no built-in terminating resistor by default unless otherwise specified High-side output, built-in freewheeling diode

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.