- Catalogs
- Hunan SonnePower International Co., Ltd.
- HMI keypad SPM-KEYP-Q12
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
HMI keypad SPM-KEYP-Q12
HMI keypad SPM-KEYP-Q12
- Keys and Outputs: 12 keys, 1 digital output (DO).
- Working Voltage: 8 to 32 V DC.
- Housing Dimensions: 135×106×31.2 mm.
- Installation: Embedded installation using 4 M4×8 screws with recommended torque < 1Nm.
- Connector: 5 pin M12 A code.
- Weight: 0.22 kg.
- Temperature Range: Working and storage temperature from -40 to 85 ℃.
- Protection Class: IP65/IP67 with cable.
- Key Life: 500,000 mechanical key presses.
- Indicator Light: 12 high bright RGB Tri-color LEDs with adjustable brightness.
- Output: 1 DOH, high side output with a max rated drive current of 1.5A, includes a built-in freewheeling diode.
- Working Voltage UEE: 8 to 32 V DC.
- Current Consumption: ≤ 100mA without external load at 24 V.
- CAN Interface: CAN 2.0 A/B.
- Baud Rate: 20 kbits/s to 1 Mbits/s (default 250 kbits/s).
- Node ID: 0x01, user-defined communication protocol.
- Processor: 32-bit high-performance MCU.
- EMC Standards: Complies with GB/T 17626.4-2008/IEC61000-4-4: 2004, GB/T 17626.5-2008/IEC61000-4-5: 2005, GB/T 17626.2-2006/IEC61000-4-2: 2001.
- Pin 01: UEE Power positive (8...32 V DC).
- Pin 02: GND Power ground.
- Pin 03: CANH (CAN bus high) for CAN communication, no built-in terminating resistor unless specified.
- Pin 04: CANL (CAN bus low).
- Pin 05: Q00 DOH high side output with built-in freewheeling diode.
Catalog excerpts
Operation Panel 1 CAN 12 keys, 1 DO Working Voltage 8...32 V DC Plastic housing+Silicone panel ( hemlines for lower surface mounting) 4 * M4×8 screws，embedded installation，recommended torque < 1Nm Working temperature Storage temperature Protection class 12 high bright RGB Tri-color LED Indicator light Backlight High bright LED ，brightness adjustable 1 DOH ，high side output，Max. Rated drive current 1.5A， Which can drive load directly, built-in freewheeling diode Current consumption ≤ 100mA (without external load at 24 V ) CAN interface Baud rate Node ID Communication protocol CAN 2.0 A/B 20 kbits/s... 1 Mbits/s (default 250 kbits/s ) 0x01 User defined Definition table of connector Pin 01 02 03 04 Function Description Power positive UEE Power ground GND CAN bus (high) CANH CAN bus(low) CANL Matched female connector Remark 8...32 V DC CAN communication，no builtin terminating resistor by default unless otherwise specified High side output, built-in freewheeling diode
Open the catalog to page 1Archived catalogs
Keypad SPM-KEYP-A171 Page
Keypad SPM-KEYP-A121 Page
Keypad SPM-KEYP-Q081 Page
Keypad SPM-KEYP-C081 Page
Keypad SPM-KEYP-B081 Page
Keypad SPM-KEYP-A081 Page
HMI SPD-070-Cx Series1 Page
- Display module
- LCD display panel
- Industrial display panel
- TFT display module
- Digital I/O
- IO module
- Color display panel
- Touch screen display panel
- Analog I/O
- Digital IO module
- Control display system
- Backlit display panel
- Fieldbus I/O module
- Programmable logic controller
- LED-backlit display panel
- Programmable display system
- Analog IO module
- Outdoor display panel
- Panel-mount keypad
- Custom display panel