Display panel SPM-LEDP-C12

Display panel SPM-LEDP-C12

Product catalog summary
Technical Parameters
Housing: The device features a plastic housing with a silicone panel, designed for lower surface mounting.
Dimensions: 111.1×68.1×37.6 mm.
Installation: Utilizes 2 M6×20 screws for embedded installation, with a recommended torque of less than 1Nm.
Connector: Equipped with a 5-pin M12 A code connector.
Weight: 0.12 kg.
Temperature Range: Operates and can be stored within -40 to 85 ℃.
Protection Class: Rated IP65/IP67 when used with a cable.
Key Features: No physical key or key life specified.
Indicator Light: Contains 12 high-brightness LEDs with customizable colors and adjustable brightness.
Output: No additional output specified.
Working Voltage: Operates on 8 to 32 V DC.
Current Consumption: ≤ 100mA without external load at 24 V.
CAN Interface: Supports CAN 2.0 A/B with a baud rate range of 20 kbits/s to 1 Mbits/s, defaulting to 250 kbits/s.
Node ID: Default is 0x01, user-defined.
Communication Protocol: User-defined protocol.
Processor: Utilizes a 32-bit high-performance MCU.
EMC Standards: Complies with GB/T 17626.4-2008/IEC61000-4-4: 2004, GB/T 17626.5-2008/IEC61000-4-5: 2005, and GB/T 17626.2-2006/IEC61000-4-2: 2001.
Product Description: SonnePower electronic & Operation panel V2.00 with a silicone LED panel and 1 CAN interface.
Connector Definition: The matched female connector is a 5-pin M12 female A code cable. Pin functions include:
  • 01: UEE Power positive (8...32 V DC)
  • 02: GND Power ground
  • 03: CANH CAN bus (high) - No built-in terminating resistor unless specified
  • 04: CANL CAN bus (low)
  • 05: NC - No connection
See more

Catalog excerpts

Display panel SPM-LEDP-C12-1

SonnePower electronic & Operation panel V2.00 SPM-LEDP-C12 Silicone LED panel 1 CAN 12 Indicator light Working Voltage 8...32 V DC Technical par ameter s Housing Descr iption Plastic housing +Silicone panel(hemlines for lower surface mounting) Dimension(L×W×H) Installation Working temperature Storage temperature Protection class Indicator light 12 high bright LED(color customization) Back light High bright LED,brightness adjustable Current consumption CAN interface Baud rate Node ID Communication protocol CAN 2.0 A/B 20 kbits/s...1 Mbits/s(default 250 kbits/s) 0x01 User defined Definition table of connector Pin Function Description Power positive 01 UEE 02 GND Power ground 03 CANH CAN bus(high) CAN bus(low) 04 CANL 05 Matched female connector SonnePower • panel • Changsha Remark 8...32 V DC CAN communication, no built-in terminating resistor by default unless otherwise specified No connect

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.