A15 Series Pilot Valve The Humphrey A15 Series Pilot Valve is perfect for equipment or device makers requiring electrically controlled pneumatic signals. Available in Normally Closed or Normally Open configurations with lead wires or Mini-DIN electrical entry in 12VDC or 24VDC. These sub-base mount, direct-acting valves have a life expectancy up to 50 million cycles. Valves feature fluorocarbon seals and an encapsulated coil affixed to a molded valve body made of PPS. Sub-base seal is retained within the valve body. Non-locking, recessed manual override is standard equipment. A15 Valves have excellent flow of 0.05 Cv and low 2.5 watt power consumption in a compact 15mm wide valve body. Customized flow/power consumption requirements are possible. Inquire with factory for availability. All valves are registered CE, and are RoHS and REACH compliant. Section Drawing/ISOs with dimensions 3/2 NC Manual Override Exhaust Port Common Out Supply In Supply In Common Out Exhaust Port

Type of Operation: Function: Media: Pressure Range: Temperature Range: Flow - Cv: Response Time: Orifice: Lubrication: Filtration: Weight: Materials: Max. Cycle Rate: Voltage Tolerance: Power: Override: Direct Solenoid 2- and 3-Way, NC or NO Air or inert gas 0 ~ 100 PSIG 14° to 122° F (-10° to 50°C) 0.05 ON: 15 ms OFF: 15 ms 1.0 mm Not required DIN ISO 8573-1 CLASS 3-4-4 40 grams Glass Filled Nylon, Copper, PPS, FKM, SST 2000 cpm +/- 10% 2.5 watts Non-Locking DIN Receptacles, Accessory MODEL Foot Print Dimensional Note: Dimensions in brackets are [metric] mm. HOW TO ORDER A15 Series Pilot Valve...