HUKX Brochure Water-cooled heat flux sensor

SBG04 Water-cooled heat flux sensor SBG04 is the preferred heat flux sensor for use as a calibration reference standard in cone calorimeter tests. The design includes two water cooling tubes fixed at a 90° angle to the sensor body. All specifications and dimensions are tailored for use in cone calorimeters, according to the standards ISO 5660 and ASTM E1354 reaction-to-fire tests. The sensor may also be used in flammability, fire resistance, and smoke chamber testing. For other water-cooled heat flux sensors, see the SBG01 and GG01 sensors. Introduction SBG04 measures heat flux in the range of...

SBG04 features a novel sensor design that combines the benefits of the technology of traditional Gardon gauges and the more recent thermopile technology of Schmidt- Boelter gauges. - cone calorimeter compatible - all specifications and dimensions standardized according to ISO 5660 and ASTM E1354 - tubes at a 90° angle to the axis of the body - scratch-resistant absorber coating (slightly lowered surface) - safe transport and storage with a practical protection cap SBG04 is the sensor of choice as a calibration reference standard for cone calorimeter test equipment, in accordance to ISO 5660 and...

Calibration With every SBG04 sensor, Hukx provides a calibration traceable to a secondary reference standard. The reference has been calibrated by comparison to the primary standard of the RISE Research Institutes of Sweden AB. SBG04 sensors are factory calibrated according to ISO 14934-3. Hukx is ISO 9001 certified but not an ISO / IEC 17025 accredited measurement laboratory. ISO/ASME standardized practices Calibration and the use of heat flux sensors (officially “heat flux meters”), such as SBG04, are subject to standardized practices, according to ISO 14934, Reaction-to-Fire tests — Calibration...

SBG04 mounting To position SBG04 according to the standard practice of ISO 5660 and ASTM E1354, a "flux meter mount" shall be used. The recommended dimensions for the slot in the mount for SBG04 are provided in Figure 4. Contact your cone calorimeter equipment supplier for a suitable mount or modification. See also - SBG01 water-cooled heat flux sensor with a 1 inch body for measurements < 200 x 103 W/m2 - GG01 Gardon gauge water-cooled high heat flux sensor for measurements up to 2500 x 103 W/m2 - HFS01 for concentrated solar flames Figure 3 Overview of SBG04-100-02 standard model: (1) thermopile...

General specifications measurand heat flux measurand in SI units sensor technology standardization rated measurement range limiting measurement range response time (63 %) output signal output signal range spectral range irradiance in W/m2 both Gardon and Schmidt-Boelter all specifications and dimensions standardized for use in cone calorimeters, according to ISO 5660 and ASTM E1354 > 12 x 10-3 V at rated measurement range 0 to 50 x 10-6 m full field of view angle black coating emissivity calibration traceability rated cooling water temperature range rated cooling water flow calibration laboratory...

About Hukx Hukx is the leading innovator in solar radiation and heat flux sensor technology. We are proud to set the standard in high-accuracy measurement, and to be working at the heart of the energy transition. Customers worldwide rely on our bestselling pyranometers and heat flux sensors. From sensor design and selection to supply and recalibration, we support you across the entire lifecycle. Hukx is headquartered in the Netherlands, with locally owned representative sales offices in the USA, Brazil, India, China, Southeast Asia, and Japan. Let us help you select the best sensor for your application....