Catalogs >
Hukseflux Thermal Sensors B.V. >
IHF02 heat flux sensor

IHF02 heat flux sensor
4Pages

Catalog excerpts

Thermal Sensors Ultra sensitive industrial heat flux sensor IHF02 ultra sensitive industrial heat flux sensor measures heat flux and temperature, typically in industrial hightemperature environments. The instrument is waterproof, withstands high pressures and is extremely robust. IHF02 is 25 times more sensitive than model IHF01, making it suitable for use at relatively low heat flux levels. It replaces model HF01 high temperature heat flux sensor. IHF02 complies with industrial safety standards, such as CE and ATEX for explosive areas, and is particularly suitable for trend-monitoring and comparative testing. Introduction IHF02 measures heat flux and surface temperature of industrial equipment like furnaces, boilers, fluidised beds, distillation columns and ovens. The sensors inside IHF02, a thermopile and a type K thermocouple, are protected by a fully sealed stainless steel body. It is suitable for long-term use at one location as well as surveys at multiple locations. IHF02 measures heat flux through the object on which it is mounted, in W/m2, as well as the temperature in °C. An optional magnet frame is offered for easy mounting on magnetic surfaces. IHF02 is 25 times more sensitive than model IHF01, so that, with the same measurement accuracy of its output voltage, it can be used to measure much lower heat flux levels. When equipped with the optional magnet frame and optional black coating, IHF02 replaces model HF01 high temperature heat flux sensor. Figure 1 IHF02 ultra sensitive industrial heat flux sensor The part of the cabling closest to the sensor is a special high-temperature metal sheathed cable with an interlocked spiral stainless steel armour. The sensor as well as the high-temperature cable and armour withstand temperatures up to 900 °C. The temperature range is reduced to 650 °C in case the optional black coating is used. The magnet frame can be used up to 500 °C. The low-temperature extension cable has a jacket of PTFE type plastic. high sensitivity robust suitable for use at high temperatures IP protection class: IP67 signal wires electrically insulated from the sensor body Figure 2 IHF02 industrial heat flux sensor mounted on an object using its easy-to-use optional magnet frame trend-monitoring and comparative measurement of heat flux and surface temperature in industrial installations, such as the shell of aluminium reduction cells. Copyright by Hukseflux. Version 2109. We reserve the right to change specifications without prior notice Page 1/4. For Hukseflux Thermal Sensors go to www.hukseflux.com or e-mail us: info@hu

Open the catalog to page 1

Thermal Sensors Using IHF02 is easy. It can be connected directly to commonly used data logging systems. The heat flux, in W/m2, is calculated by dividing the IHF02 output, a small voltage, by the sensitivity. The sensitivity is provided with IHF02 on its product certificate. The temperature sensor is a conventional type K thermocouple. Equipped with heavy-duty cabling and a fully stainless steel casing, preventing moisture from penetrating the sensor, IHF02 has proven to be very reliable. It survives long-term outdoor installation. Measurand Measurand Heat flux sensor Temperature sensor...

Open the catalog to page 2

46 Figure 4 IHF02 with optional magnet frame. The magnet frame’s two magnets (1), spring-loaded bolts and housing (3) ensure the IHF02 sensor (2) can be positioned easily and firmly on the object to be measured. The interlocked spiral stainless steel armoured high-temperature cable (4) is held in place by the cable strain relief (5). The handle (6) allows for easy manual removal of the instrument. Dimensions in x 10-3 m. Trend monitoring and comparative measurement IHF02 is most suitable for relative measurements, i.e. monitoring of trends relative to a certain reference point in time or...

Open the catalog to page 3

Thermal Sensors MARKET LEADER IN HEAT FLUX MEASUREMENT IHF02 outperforms competing models: how? The IHF industrial heat flux sensor product range is the best available for use in unfriendly environments and at high temperatures. This is why. Thermocouple included Optional: Industry safety approvals High temperature and high sensitivity EC type examination certificate (ATEX) II 2G Ex db IIC T6 for use in explosive environments. Suitable for use at relatively low heat flux levels. The IHF range sensors may be used up to 900 °C. Practical mounting flanges. The optional magnet frame makes...

Open the catalog to page 4

IHF02 heat flux sensor 4Pages

Catalog excerpts

All Hukseflux Thermal Sensors B.V. catalogs and technical brochures

IHF02 heat flux sensor
4Pages