*mydirectindustry

Catalogs
Hughes Safety Showers
STD-TC-100KS/45G Datasheet

STD-TC-100KS/45G Datasheet

Product catalog summary

Overview: This document provides detailed specifications and operational guidelines for a temperature-controlled safety shower and eye/face wash unit with an integral water heater. It is designed for environments lacking a reliable hot water supply or experiencing low ambient temperatures, ensuring compliance with EN and ANSI standards by delivering 15 minutes of tepid water.

Specifications:

Materials: Stainless steel is used for pipework, fittings, frame, and operating valve. The shower nozzle is made from injection-moulded nylon 6, and the eye wash features chrome-plated brass and stainless steel components.
Insulation: Polyurethane foam with a GRP outer casing.
Electrical Equipment: Suitable for ATEX Zone 1 & 2, with a 230/240V single-phase supply (110V optional).
Heating: Immersion heated insulated tank with a load of 3kW at 240V.
Water Temperature: Factory set to 25°C, adjustable.
Pressure: Operating pressure ranges from 2 to 6 BAR G, with a factory-set pressure reducing valve at 3 BAR G.
Flow Rates: Minimum flow rates are 76 L/min for the shower and 12 L/min for the eye wash.
Operating Temperature: Suitable for -25°C to 40°C.

Operation:

The shower is activated by pulling a handle, while the eye wash is operated by pulling down a lid.

Dimensions & Weight:

Dimensions are 950mm x 1677mm x 2446mm, with a weight of 230kg.

General Arrangement:

The unit includes a pictogram sign, operating ball valve, aerated diffuser nozzle, and a mixed water outlet temperature gauge.
It is designed for both hazardous and non-hazardous areas, with a lifting point for transportation.

Catalog excerpts

Safety shower and ASA closed bowl with integral water heater When a reliable hot water supply is not readily available, or in environments that experience low ambient temperatures, this temperature controlled safety shower with eye/face wash unit offers the solution. A 300 litre integral heated water tank remains on standby to deliver 15 minutes of water within the tepid range, meeting EN and ANSI recommendations. The high flow rate thermostatically controlled mixing valve ensures the temperature is maintained at between 22-28C. Suitable for indoor or outdoor use, this model can be used in areas classified as hazardous or non-hazardous. Specifications MATERIALS OF CONSTRUCTION PIPEWORK & FITTINGS Stainless steel mmmJustrite Safety Group

Open the catalog to page 1

General Arrangement Drawing Safety shower and ASA closed bowl eye wash with integral water heater PICTOGRAM SHOWER & EYE/FACE WASH SIGN OPERATING BALL VALVE TEMPERATURE & PRESSURE SAFETY RELIEF VALVE PICTOGRAM SHOWER AND EYE/FACEWASH SIGN JUNCTION BOX FOR IMMERSION HEATER & HEAT TRACE TAPE (NFLP) AERATED DIFFUSER NOZZLE MIXED WATER OUTLET EYE/FACEWASH FOUNTAIN TEMPERATURE GAUGE SHOWER IMMERSION HEATER SHOWER HAND CONTROL FOR OPERATION THERMOSTATIC MIXER VALVES WHITE GRP TANK SURROUND 2136 TO SHOWER NOZZLE SHOWER NOZZLE 1-1/2 INCH MALE DRAIN OUTLET PRESSURE REDUCING VALVE 1-1/4 INCH BSP MALE COLD...

Open the catalog to page 2

STD-TC-100KS/45G Datasheet

STD-TC-100KS/45G Datasheet

Catalog excerpts

All Hughes Safety Showers catalogs and technical brochures