*mydirectindustry

Catalogs
Hughes Safety Showers
STD-MH-P-2000L Product Datasheet

STD-MH-P-2000L Product Datasheet

Product catalog summary

Overview: The document describes a mobile self-contained heated safety shower with an eye wash, designed for emergency use by employees exposed to hazardous substances. It features a 2000-litre capacity and is easily transportable using a towing hitch.

Standards and Performance: The shower meets EN and ANSI standards, providing a continuous flow of tepid water for over 15 minutes at a rate of 76 litres per minute. An optional insulated jacket is recommended for cold weather to prevent freezing.

Specifications:

Materials: Stainless steel pipework and fittings, polyethylene tank, galvanised mild steel chassis.
Axle/Suspension: Avonride rubber torsion beam axle with auto reverse brakes.
Coupling: Avonride auto reverse coupling with 40mm eye, breakaway cable, and parking brake lever.
Ancillary Equipment: Includes moulded mud guards, front telescopic jockey wheel, lighting board, and rear propstand options.
Shower Nozzle: Machine moulded nylon 6.
Eye Wash: ASA closed bowl.

Services:

Capacity: 2000 L / 528 US gal.
Electrical Supply: Flameproof and non-flameproof options available with varying pump and heater ratings.
Water Inlet: 18” hinged manlid cover.
Operating Pressure: 2 to 6 BAR G / 29 to 87 PSI.
Minimum Flow Rates: Shower: 76 L/min, Eye wash: 12 L/min.
Ambient Operating Temperature: 0C to 35C / 32F to 95F.

Operation:

Shower: Activated by pushing down a lever.
Eye Wash: Activated by pulling the lid down.

Dimensions & Weight:

Dimensions (WxDxH): 1760mm x 4157mm x 2893mm.
Weight: Full: 2460kg, Empty: 460kg.

Contact Information: Hughes Safety Showers Ltd, Whitefield Road, Bredbury, Stockport SK6 2SS UK. Phone: +44 (0)161 430 6618, Email: [email protected]

Catalog excerpts

It is essential to provide emergency safety showers for use by employees at risk of exposure to hazardous substances, whatever the location. This immersion heated 2000 litre mobile safety shower with ASA closed bowl eye/face wash allows flexibility of location, being easily transported behind a suitable vehicle using the towing hitch provided. Designed to meet EN and ANSI standards, it is capable of delivering a continous flow of tepid water for over 15 minutes at a rate of 76 litres per minute. The optional insulated jacket is advised for use during colder months to prevent freezing and maintain the water temperature within the tepid range. Justrite Safety Group

Open the catalog to page 1

SEALED INSPECTION HATCH & FILLING POINT- STAINLESS STEEL REMOVABLE OVERHEAD SHOWER ARM- SELF-DRAINING. SPRAY NOZZLE (60° ANGLE) SHOWER OPERATING LEVER -PROXIMITYSWITCH FITTED TO OPERATING LEVER TO APERATE PUMP DRAIN POINT CONTROL JUNCTION BOX-& ELECTRICAL CONNECTION FOR WATER HEATER AND SUBMERSIBLE PUMP ■4 STUD 5 1/2 INCH P.C.D RIMS WITH 185 X 13X6 PLY TYRES PROXIMITY SWITCH FITTED TO EYE/FACEWASH TO OPERATE PUMP ON -ACTIVATION OVERHEAD SHOWER ARM ASSEMBLY SPANNER HUGHES www.hughes-safety.com Justrite Safety Group Hughes Safety Showers Ltd, Whitefield Road, Bredbury, Stockport SK6 2SS UK

Open the catalog to page 2

All Hughes Safety Showers catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list