Product Datasheet Trace tape heated pedestal mounted eye wash with ASA closed bowl and integral handheld shower STD-H-25KS/P Suitable for outdoor use where there is the possibility of water within the pipework freezing. Both hazardous and non-hazardous areas can benefit from the trace tape heating and polyurethane foam insulation to provide frost protection. The eye/face wash unit has a flow rate of 12 litres per minute and is complemented by an integral handheld eyebath diffuser on a flexible hose to decontaminate the affected area directly. Meets EN15154 and ANSI Z358.1-2014 standards. Specifications MATERIALS OF CONSTRUCTION PIPEWORK Stainless steel Chrome plated brass retaining ring, stainless steel filter mesh, plastic body INSULATION & OUTER CASING Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing STANDARD FINISH White with green/white safety stripes SERVICES WATER INLET OPERATING PRESSURE MINIMUM FLOW RATES 11/4” Male BSP 2 to 6 BAR G / 29 to 87 PSI (higher supply pressures accommodated with the incorporation of the optional pressure reducing valve) Eye wash: 12 L per minute / 3 US gal per minute Handheld: 1.5 L per minute / 0.4 US gal per minute HEATING TYPE Trace tape heated HEATING LOAD ELECTRICAL EQUIPMENT ATEX Zone 1 & 2 gas groups IIA and IIB, Temp Class T3 (IIC available) ELECTRIC SUPPLY 240V Single Phase, 50/60Hz or 110V available AMBIENT OPERATING TEMPERATURE MINIMUM OPERATION EYE/FACE WASH DIMENSIONS & WEIGHT DIMENSIONS (WxDxH)

General Arrangement Drawing Trace tape heated pedestal mounted eye wash with ASA closed bowl and integral handheld shower STD-H-25KS/P www.hughes-safety.com Hughes Safety Showers Ltd, Whitefield Road, Bredbury, Stockport SK6 2SS UK T: +44 (0)161 430 6618 E: [email protected]