Pedestal mounted eye/face wash with ABS open bowl STD-75G/PSTD-75GS/P Manufactured to be quick and simple to operate in the event of an emergency, this pedestal mounted eye/face wash with open ABS bowl can be operated using the foot plate or optional foot treadle. The eye wash diffusers are protected by dust covers which “pop-off” once the unit is activated. Pedestal pipework is available in hardwearing stainless steel or galvanised mild steel. Meets the requirements of EN15154 and ANSI Z358.1-2014. SpecificationsMATERIALS OF CONSTRUCTION BOWL/LID ABS DIFFUSERS Chrome plated brass retaining ring, stainless steel filter mesh, plastic body PIPEWORK Stainless steel (GS) or galvanised mild steel (G) STANDARD FINISH (G) Green powder coated (G) Polished brush finish (GS) SERVICES WATER INLET OPERATING PRESSURE (higher supply pressures accommodated with the incorporation of the optional pressure reducing valve) MINIMUM FLOW RATES 12 L per minute / 3 US gal per minute Justrite Safety Group

General Arrangement Drawing Pedestal mounted eye/face wash with ABS open bowl STD-75G/P STD-75GS/P 1 AERATED DIFFUSER NOZZLES WITH POPOFF DUST COVERS PUSH LEVER FOR EYE/FACEWASH OPERATION FLOW REGULATOR EYE/FACEWASH BALL VALVE PVC DRAIN ASSEMBLY DRAIN OUTLET FIXING DETAIL SCALE 1:8 NAME DRAWN: CHECKED: APPROVED: Whitefield Road, Bredbury Stockport, Cheshire, SK6 2SS T: +44(0)161-430-6618 E: [email protected] DEBUR AND BREAK SHARP EDGES DIMENSIONS ARE IN MILLIMETRES UNLESS SPECIFIED OTHERWISE TOLERANCES LINEAR: ANGULAR: 1-1/4 INCH BSP FEMALE WATER INLET 4 OFF 15 HOLES F/ M12 FIXING...