*mydirectindustry

Catalogs
Hughes Safety Showers
STD-75G Product Datasheet

STD-75G Product Datasheet

Product catalog summary

Product Overview: The wall-mounted ABS open bowl eye/face wash is designed for indoor use near potential hazards, suitable for various industrial applications due to its durable ABS construction. It features twin spray nozzles with protective covers to prevent contamination and can be operated via a push plate or optional foot treadle.

Compliance: This unit meets the standards of EN15154 and ANSI Z358.1-2014, ensuring it adheres to international safety requirements.

Materials and Finish: The bowl is made of ABS, while the diffusers consist of a chrome-plated brass retaining ring, stainless steel filter mesh, and a plastic body. The standard finish is yellow.

Services and Specifications:

Water Inlet: 1/2” Female BSP
Operating Pressure: 2.0 to 6 BAR G / 29 to 87 PSI, with an optional pressure reducing valve for higher pressures
Minimum Flow Rates: 12 L per minute / 3 US gal per minute
Ambient Operating Temperature: Minimum 5°C / 41°F, Maximum 35°C / 95°F

Operation: The eye/face wash is activated using a push plate.

Dimensions and Weight:

Dimensions (WxDxH): 424mm (16.7in) x 402mm (15.8in) x 286mm (11.2in)
Weight: 4kg / 9lb

Additional Features: The unit includes a PVC drain outlet for a 40mm pipe, a flow regulator, and two aerated diffuser nozzles with dust covers. It is designed for wall mounting with slots provided for secure installation.

Catalog excerpts

Essential for indoor locations in close proximity to potential hazards. The durable nature of the ABS bowl makes this wall mounted eye/face wash unit suitable for many industrial applications. Twin spray nozzles are fitted with covers to prevent contamination when not in use. Operation is simple either via the standard push plate or an optional foot treadle. Meets the requirements of EN15154 and ANSI Z358.1-2014. Justrite Safety Group

Open the catalog to page 1

General Arrangement Drawing Wall mounted ABS open bowl eye/face wash STD-75G 1 ISOMETRIC VIEW 2 OFF AERATED DIFFUSER NOZZLES WITH DUST COVERS FLOW REGULATOR 15mm COMPRESSION FITTING OR 1/2 INCH BSP WATER INLET SLOTS FOR WALL MOUNTING TYP 2 PLACES EYE/FACEWASH BALL VALVE YELLOW ABS DRAIN BOWL PVC DRAIN OUTLET FOR 40MM PIPE Whitefield Road, Bredbury Stockport, Cheshire, SK6 2SS T: +44(0)161-430-6618 E: [email protected] 1 DIMENSIONS ARE IN MILLIMETRES UNLESS SPECIFIED OTHERWISE TOLERANCES LINEAR: ANGULAR: DEBUR AND BREAK SHARP EDGES MODEL NO: STD-75G CODE: 03 H PLU GV NFP 00350...

Open the catalog to page 2

STD-75G Product Datasheet

STD-75G Product Datasheet

Catalog excerpts

All Hughes Safety Showers catalogs and technical brochures