Floor mounted laboratory safety shower with eye washLAB-18GS/34G Suitable for laboratories and general light duty indoor use, this combination emergency safety shower and eye/face wash meets the demands of the European Standard EN15154 for Laboratories and ANSI Z358.1-2014. The powder coated stainless steel construction protects against corrosive and flammable substances and is easy to clean when sterilising the lab environment. Specifications MATERIALS OF CONSTRUCTION PIPEWORK & FITTINGS Stainless steel OPERATING VALVE SHOWER ROSE EYE WASH BOWL EYE WASH DIFFUSER STANDARD FINISH Stainless steel Powder coated stainless steel Powder coated stainless steel Chrome plated brass retaining ring, stainless steel filter mesh, plastic body Green powder coated polyester SERVICES WATER INLET OPERATING PRESSURE (higher supply pressures accommodated with the incorporation of the optional pressure reducing valve) MINIMUM FLOW RATES Shower: 76 L per minute / 20 US gal per minute Eye wash: 12 L per minute / 3 US gal per minute AMBIENT OPERATING TEMPERATURE MINIMUM 5C / 41F HUGHES www.hughes-safety.com Justrite Safety Group

General Arrangement Drawing Floor mounted laboratory safety shower with eye wash LAB-18GS/34G LAB-18GS/34G 1 STAINLESS STEEL POWDER COATED SHOWER ROSE (ALSO AVAILABLE IN ABS) ALTERNATIVE WATER INLET 1 INCH BSP MALE SHOWER HAND CONTROL PICTO SHOWER & EY SIGN WITH BR (OPT HUGHES SAFETY SHOWER BALL VALVE AERATED DIFFUSER NOZZLES WITH 'POP-OFF' DUST COVERS EYE/FACEWASH FLOW REGULATOR PUSH PLATE FOR EYE/FACEWASH OPERATION HUGHES SAFETY SHOWER BALL VALVE 1 INCH BSP MALE WATER INLET STAINLESS STEEL POWDER COATED DRAIN BOWL 150 100 4 X 15 HOLES FOR HOLD DOWN BOLTS Whitefield Road, Bredbury Stockport,...