EXP-SD-75G/P

EXP-SD-75G/P

EXP-SD-75G/P

Product catalog summary
Product Overview: The self-draining pedestal mounted eye/face wash features an ABS open bowl designed for use in hot climates. It prevents standing water from heating up and potentially scalding users. The unit is available in high visibility yellow and can be operated via a push plate or an optional foot treadle for hands-free use.
Materials of Construction: The bowl and lid are made of ABS plastic. Diffusers consist of a chrome-plated brass retaining ring, stainless steel filter mesh, and a plastic body. Pipework options include stainless steel (GS) or galvanized mild steel (G).
Finish: The standard finish for galvanized steel is green powder-coated, while stainless steel has a polished brush finish.
Services: The water inlet is 1 1/4” Female BSP. The operating pressure ranges from 2.0 to 6 BAR G (29 to 87 PSI), with higher pressures accommodated by an optional pressure reducing valve. The minimum flow rate is 12 liters per minute (3 US gallons per minute).
Operating Conditions: The ambient operating temperature ranges from a minimum of 5°C (41°F) to a maximum of 55°C (131°F).
Operation: The eye/face wash is activated by a push-down lever, with an optional foot treadle for hands-free operation.
Dimensions & Weight: The unit measures 400mm (15.7in) x 505mm (19.9in) x 1273mm (50.1in) and weighs 10kg (22lb).
Standards Compliance: The product meets EN15154 and ANSI Z358.1-2014 standards.
Additional Features: The design includes aerated diffuser nozzles with pop-off dust covers, a flow regulator, and a 1-1/2 inch BSP drain outlet. Fixing details include four 15mm holes for M12 fixing bolts (not supplied).
See more

Catalog excerpts

EXP-SD-75G/P-1

EXP-SD-75G/PEXP-SD-75GS/P Intended for use in hot climates. The innovative design of this pedestal mounted eye wash allows standing water, potentially subject to solar radiation, to drain away from the standpipe and avoid scalding a casualty upon initial activation. This ABS plastic open bowl eye/face wash in high visibility yellow is simple to operate using the push plate. An optional treadle can be added to enable hands-free foot activation. Meets EN15154 and ANSI Z358.1-2014 standards. Specifications MATERIALS OF CONSTRUCTION DIFFUSERS Chrome plated brass retaining ring, stainless steel filter mesh, plastic body Justrite Safety Group

 Open the catalog to page 1
EXP-SD-75G/P-2

General Arrangement Drawing Self-draining pedestal mounted eye/face wash with ABS open bowl EXP-SD-75G/P EXP-SD-75GS/P 1 AERATED DIFFUSER NOZZLES WITH POPOFF DUST COVERS EYE/FACEWASH HAND CONTROL FLOW REGULATOR 1-1/2 INCH BSP DRAIN OUTLET BLEED PIPE EYE/FACE WASH BALL VALVE 1-1/4 INCH BSP WATER INLET 4x 15 HOLES FOR M12 FIXING BOLTS (NOT SUPPLIED) FIXING DETAIL SCALE 1:8 Whitefield Road, Bredbury Stockport, Cheshire, SK6 2SS T: +44(0)161-430-6618 E: [email protected] 1 DIMENSIONS ARE IN MILLIMETRES UNLESS SPECIFIED OTHERWISE TOLERANCES LINEAR: ANGULAR: DEBUR AND BREAK SHARP EDGES...

 Open the catalog to page 2

All Hughes Safety Showers catalogs and technical brochures

  1. STD-J-40K/45G

    2  Pages

  2. STD-28G

    2  Pages

  3. STD-58G

    2  Pages

  4. STD-38G

    2  Pages

  5. Alarms

    1  Page

  6. LAB-23GS/OD

    2  Pages

  7. STD-25K/P

    2  Pages

  8. STD-45G

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.