1. Catalogs
  2. Hughes Safety Showers
  3. EXP-SD-75G/P EXP-SD-75GS/P Datasheet

EXP-SD-75G/P EXP-SD-75GS/P Datasheet

EXP-SD-75G/P EXP-SD-75GS/P Datasheet

EXP-SD-75G/P EXP-SD-75GS/P Datasheet

Product catalog summary
Materials of Construction: The eye/face wash features an ABS open bowl and lid, with diffusers made from chrome-plated brass retaining rings, stainless steel filter mesh, and a plastic body. The pipework is available in stainless steel or galvanized mild steel.
Standard Finish: The galvanized version is green powder-coated, while the stainless steel version has a polished brush finish.
Services: The water inlet is 1 1/4” Female BSP. It operates at a pressure range of 2.0 to 6 BAR G (29 to 87 PSI), with higher pressures accommodated by an optional pressure reducing valve. The minimum flow rate is 12 liters per minute (3 US gallons per minute).
Operating Temperature: The ambient operating temperature ranges from a minimum of 5°C (41°F) to a maximum of 55°C (131°F).
Operation: The eye/face wash is activated by a push-down lever, with an optional foot treadle for hands-free operation.
Dimensions & Weight: The unit measures 400mm x 505mm x 1273mm (15.7in x 19.9in x 50.1in) and weighs 10kg (22lb).
Design & Compliance: Designed for hot climates, the self-draining feature prevents standing water from heating up and causing scalding. The unit is high visibility yellow and meets EN15154 and ANSI Z358.1-2014 standards.
Model Information: The product models are EXP-SD-75G/P and EXP-SD-75GS/P, with detailed drawings available for installation guidance.
See more

Catalog excerpts

EXP-SD-75G/P EXP-SD-75GS/P Datasheet-1

EXP-SD-75G/PEXP-SD-75GS/P Intended for use in hot climates. The innovative design of this pedestal mounted eye wash allows standing water, potentially subject to solar radiation, to drain away from the standpipe and avoid scalding a casualty upon initial activation. This ABS plastic open bowl eye/face wash in high visibility yellow is simple to operate using the push plate. An optional treadle can be added to enable hands-free foot activation. Meets EN15154 and ANSI Z358.1-2014 standards. Specifications MATERIALS OF CONSTRUCTION DIFFUSERS Chrome plated brass retaining ring, stainless steel filter mesh, plastic body Justrite Safety Group

 Open the catalog to page 1
EXP-SD-75G/P EXP-SD-75GS/P Datasheet-2

General Arrangement Drawing Self-draining pedestal mounted eye/face wash with ABS open bowl EXP-SD-75G/P EXP-SD-75GS/P 1 AERATED DIFFUSER NOZZLES WITH POPOFF DUST COVERS EYE/FACEWASH HAND CONTROL FLOW REGULATOR 1-1/2 INCH BSP DRAIN OUTLET BLEED PIPE EYE/FACE WASH BALL VALVE 1-1/4 INCH BSP WATER INLET 4x 15 HOLES FOR M12 FIXING BOLTS (NOT SUPPLIED) FIXING DETAIL SCALE 1:8 Whitefield Road, Bredbury Stockport, Cheshire, SK6 2SS T: +44(0)161-430-6618 E: [email protected] 1 DIMENSIONS ARE IN MILLIMETRES UNLESS SPECIFIED OTHERWISE TOLERANCES LINEAR: ANGULAR: DEBUR AND BREAK SHARP EDGES...

 Open the catalog to page 2

All Hughes Safety Showers catalogs and technical brochures

  1. EXP-SD-75G/P

    2  Pages

  2. STD-J-40K/45G

    2  Pages

  3. STD-28G

    2  Pages

  4. STD-58G

    2  Pages

  5. STD-38G

    2  Pages

  6. Alarms

    1  Page

  7. LAB-23GS/OD

    2  Pages

  8. STD-25K/P

    2  Pages

  9. STD-45G

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.