*mydirectindustry

Catalogs
Hughes Safety Showers
EXP-EJ-5G/10G Datasheet

EXP-EJ-5G/10G Datasheet

Product catalog summary

Product Overview: The Trace Tape Heated Safety Shower with Body Spray (Model: EXP-AH-5GS/10G) is designed for cold climates, providing both a safety shower and an integrated body spray. It is trace tape heated and insulated to ensure maximum frost protection, meeting EN15154 and ANSI Z358.1-2014 standards.

Specifications:

Materials of Construction: Stainless steel pipework and fittings, stainless steel operating valve, injection moulded nylon 6 shower nozzle, uPVC body spray, polyurethane foam insulation with a medium density polyethylene outer casing.
Electrical Equipment: Suitable for ATEX Zone 1 & 2, Gas groups IIA and IIB, Temp Class T3 (IIC available).
Electrical Supply: 240V, single phase, 50/60Hz (110V available).
Heating Type: Trace tape heated and insulated with a heating load of 42 watts.
Water Inlet: 1 1/4” male BSP.
Operating Pressure: 2 to 6 BAR G / 29 to 87 PSI, with optional pressure reducing valve for higher pressures.
Minimum Flow Rates: 115 L per minute / 30 US gal per minute for shower/body spray.
Ambient Operating Temperature: Minimum -20C / -4F, Maximum 35C / 95F.
Operation: Pull handle for shower/body spray activation.
Dimensions & Weight: 320mm (12.6in) x 890mm (35in) x 2330mm (91.7in), Weight: 24kg (53lb).

Additional Features: The product includes optional features such as a sign, foot panel, and is suitable for both flameproof and non-flameproof areas. The modules are removable with the standpipe in situ.

General Arrangement Drawing: The document includes a detailed isometric view and fixing detail view, highlighting components such as the ball valve, polyethylene insulated jacket, air thermostat, junction box, and self-draining spray nozzle.

Catalog excerpts

Product Datasheet Trace tape heated safety shower with body spray EXP-AH-5GS/10G For cold climates requiring both a safety shower and integrated body spray, this floor mounted option is trace tape heated and insulated for maximum frost protection. The body spray enables direct efficient washing of the lower part of the body for a thorough full body decontamination. Meets EN15154 and ANSI Z358.1-2014 requirements. Shown with optional sign and foot panel MATERIALS OF CONSTRUCTION PIPEWORK & FITTINGS Stainless steel OPERATING VALVE Stainless steel, full bore, stay open ball valve SHOWER NOZZLE Injection moulded nylon 6 BODY SPRAY INSULATION & OUTER CASING Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing SERVICES ELECTRICAL EQUIPMENT ATEX Zone 1 & 2. Gas groups IIA and IIB. Temp Class T3 (IIC available) ELECTRICAL SUPPLY 240V, single phase, 50/60Hz (110V available) HEATING TYPE Trace tape heated and insulated HEATING LOAD WATER INLET OPERATING PRESSURE 2 to 6 BAR G / 29 to 87 PSI (higher supply pressures accommodated with the incorporation of the optional pressure reducing valve) MINIMUM FLOW RATES Shower/Body spray: 115 L per minute / 30 US gal per minute AMBIENT OPERATING TEMPERATURE MINIMUM OPERATION SHOWER/BODY SPRAY Pull handle DIMENSIONS & WEIGHT DIMENSIONS (WxDxH)

Open the catalog to page 1

General Arrangement Drawing Trace tape heated safety shower with body spray EXP-AH-5GS/10G 1055 PICTOGRAM SIGN & BRACKET (OPTIONAL) 667 HUGHES SAFETY SHOWER BALL VALVE LIGHT (OPTIONAL) POLYETHYLENE INSULATED JACKET SELF-DRAINING SPRAY NOZZLE (60 ANGLE) HUGHES BALL VALVE SELF-DRAINING SPRAY NOZZLE (120 ANGLE) JUNCTION BOX BODY SPRAY HEATING TRACE TAPE STAINLESS STEEL CHAIN 1 1/4 INCH BSP MALE WATER INLET HEATING TRACE TAPE SHOWER HAND CONTROL FOOT PANEL CONTROL (OPTIONAL) FIXING DETAIL VIEW STAINLESS STEEL SUPPORT SPRINGS DATE 1 1/4 INCH BSP MALE WATER INLET Whitefield Road, Bredbury Stockport,...

Open the catalog to page 2

EXP-EJ-5G/10G Datasheet

EXP-EJ-5G/10G Datasheet

Catalog excerpts

All Hughes Safety Showers catalogs and technical brochures