• Materials of Construction: The eye wash features an ASA closed bowl with chrome-plated brass retaining ring, stainless steel filter mesh, and a plastic body. Pipework is available in stainless steel or galvanized steel. It includes polyurethane foam insulation with a medium-density polyethylene impact-resistant outer casing.
• Standard Finish: White with green/white safety stripes, with alternative colors available.

• Water Inlet: 1 1/4” Male BSP.
• Operating Pressure: 2.0 to 6 BAR G / 29 to 87 PSI, with optional pressure reducing valve for higher pressures.
• Minimum Flow Rates: 12 L per minute / 3 US gal per minute.
• Ambient Operating Temperature: Minimum 0°C / 32°F, Maximum 35°C / 95°F.

• Eye/Face Wash: Activated by pulling the lid down.

• Dimensions: 320mm (12.6in) x 640mm (25.2in) x 1224mm (48.2in).
• Weight: 14kg / 31lb.

The eye wash should be installed within 10 seconds reach of a hazardous area. It is designed with a medium-density polyethylene impact-resistant outer casing and pre-insulated to protect against frost and sunlight. The ASA lid protects the bowl and diffusers from contaminants. It complies with EN15154 and ANSI Z358.1-2014 standards.

• Includes a hinged lid, flow regulator, ball valve, and two aerated diffuser nozzles.
• 1-1/4 inch BSP female water inlet and 1-1/2 inch BSP male drain outlet.