EXP-AH-5G Datasheet

EXP-AH-5G Datasheet

EXP-AH-5G Datasheet

Product catalog summary
Overview: The trace tape heated floor mounted safety shower is designed to ensure worker safety in hazardous environments by preventing water in the pipework from freezing in cold climates. It provides a constant flow rate of 76 litres per minute for effective decontamination and meets EN and ANSI standards.
Specifications:
  • Materials of Construction: Stainless steel pipework and fittings, stainless steel full bore stay open ball valve, injection moulded nylon 6 shower nozzle, polyurethane foam insulation with medium density polyethylene outer casing.
  • Electrical Equipment: Suitable for ATEX Zone 1 & 2, Gas group IIC, Temp Class T5/6, Dust group IIIC, Temp class T85/100.
  • Electrical Supply: 240V, single phase, 50/60Hz (110V available).
  • Heating Type: Trace tape heated and insulated with a heating load of 42 watts.
  • Water Inlet: 11/4” male BSP.
  • Operating Pressure: 2 to 6 BAR G / 29 to 87 PSI, with optional pressure reducing valve for higher pressures.
  • Minimum Flow Rates: 76 L per minute / 20 US gal per minute.
  • Ambient Operating Temperature: Minimum -25C / -13F, Maximum 35C / 95F.
Operation: The shower is activated by a pull handle.
Dimensions & Weight:
  • Dimensions: 210mm (8.3in) x 890mm (35in) x 2330mm (91.7in).
  • Weight: 21kg (46lb).
General Arrangement Drawing: The drawing provides an isometric view and details such as the trace tape heating, junction box for electrical connection, air thermostat, shower ball valve, and self-draining spray nozzle with a 60-degree angle. It includes dimensions and fixing bolt details.
See more

Catalog excerpts

EXP-AH-5G Datasheet-1

Product Datasheet Trace tape heated floor mounted safety shower EXP-AH-5GS Ensure worker safety in all conditions with this trace tape heated and insulated emergency safety shower. Suitable for hazardous environments, this floor mounted model prevents water within the pipework freezing in colder climates. A constant flow rate of 76 litres per minute provides a thorough decontamination of a casualty exposed to dangerous contaminants. Meets EN and ANSI requirements. Specifications MATERIALS OF CONSTRUCTION PIPEWORK & FITTINGS Stainless steel OPERATING VALVE Stainless steel, full bore, stay open ball valve SHOWER NOZZLE Injection moulded nylon 6 INSULATION & OUTER CASING Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing SERVICES ELECTRICAL EQUIPMENT ATEX Zone 1 & 2. Gas group IIC. Temp Class T5/6. Dust group IIIC, temp class T85/100 ELECTRICAL SUPPLY 240V, single phase, 50/60Hz (110V available) HEATING TYPE Trace tape heated and insulated HEATING LOAD WATER INLET OPERATING PRESSURE 2 to 6 BAR G / 29 to 87 PSI (higher supply pressures accommodated with the incorporation of the optional pressure reducing valve) MINIMUM FLOW RATES Shower: 76 L per minute / 20 US gal per minute AMBIENT OPERATING TEMPERATURE MINIMUM OPERATION SHOWER Pull handle DIMENSIONS & WEIGHT DIMENSIONS (WxDxH)

 Open the catalog to page 1
EXP-AH-5G Datasheet-2

General Arrangement Drawing Trace tape heated floor mounted safety shower EXP-AH-5GS SHOWER BALL VALVE POLYETHENE INSULATED JACKET SELF-DRAINING SPRAY NOZZLE (60 ANGLE) PULL HANDLE FOR SHOWER ACTIVATION TRACE TAPE HEATING AIR THERMOSTAT JUNCTION BOX FOR ELECTRICAL CONNECTION TRACE TAPE HEATING NAME DRAWN: 4 X 15 HOLES FOR M12 FIXING BOLTS (NOT SUPPLIED) Whitefield Road, Bredbury Stockport, Cheshire, SK6 2SS T: +44(0)161-430-6618 E: [email protected] MODEL NO: EXP-AH-5GS(F CODE: 03 H HEG S6 FP 005 OUTDOOR EMERGENCY SAFETY S DIMENSIONS ARE IN MILLIMETRES UNLESS SPECIFIED OTHERWISE TOLERANCES...

 Open the catalog to page 2

All Hughes Safety Showers catalogs and technical brochures

  1. EXP-SD-75G/P

    2  Pages

  2. STD-J-40K/45G

    2  Pages

  3. STD-28G

    2  Pages

  4. STD-58G

    2  Pages

  5. STD-38G

    2  Pages

  6. Alarms

    1  Page

  7. LAB-23GS/OD

    2  Pages

  8. STD-25K/P

    2  Pages

  9. STD-45G

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.