Catalogs >
Hughes Safety Showers >
EXP-AH-5G/45G Datasheet

EXP-AH-5G/45G Datasheet
2Pages

Catalog excerpts

Product Datasheet Trace tape heated safety shower with ABS closed bowl eye wash EXP-AH-5GS/45G A floor mounted safety shower with eye/face wash unit designed for use where there is the risk of water within the pipework freezing in cold climates. Trace tape heating and insulation ensures workers exposed to hazardous substances can utilize the safety shower without the risk of malfunction due to freezing conditions. The shower provides 76 litres per minute continuous water flow, while the eye wash gives an aerated flow of 12 litres per minute for a gentle washing action. Meets EN and ANSI requirements. Shown with optional sign MATERIALS OF CONSTRUCTION PIPEWORK & FITTINGS Stainless steel OPERATING VALVE Stainless steel, full bore, stay open ball valve SHOWER NOZZLE Injection moulded nylon 6 Chrome plated brass retaining ring, stainless steel filter mesh, plastic body INSULATION & OUTER CASING Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing SERVICES ELECTRICAL EQUIPMENT ATEX Zone 1 & 2. Gas groups IIA and IIB. Temp Class T3 (IIC available) ELECTRICAL SUPPLY 240V, single phase, 50/60Hz (110V available) HEATING TYPE Trace tape heated and insulated HEATING LOAD WATER INLET OPERATING PRESSURE 2 to 6 BAR G / 29 to 87 PSI (higher supply pressures accommodated with the incorporation of the optional pressure reducing valve) MINIMUM FLOW RATES Shower: 76 L per minute / 20 US gal per minute Eye wash: 12 L per minute / 3 US gal per minute AMBIENT OPERATING TEMPERATURE MINIMUM OPERATION SHOWER Pull handle DIMENSIONS & WEIGHT DIMENSIONS (WxDxH)

Open the catalog to page 1

General Arrangement Drawing Trace tape heated safety shower with ABS closed bowl eye wash EXP-AH-5GS/45G 788 658 SAFETY SHOWER BALL VALVE POLYETHENE INSULATED JACKET SPRAY NOZZLE (60 ANGLE) TRACE TAPE HEATING AERATED DIFFFUSER NOZZLES AIR THERMOSTAT JUNCTION BOX FOR ELECTRICAL CONNECTION HINGED LID OPERATING VALVE TRACE TAPE HEATING 1097 TO DIFFUSERS PULL HANDLE FOR SHOWER ACTIVATION 1-1/2 INCH BSP MALE DRAIN OUTLET FLOW REGULATOR 1-1/4 INCH BSP MALE WATER INLET 4 X 15 HOLES FOR M12 FIXING BOLTS (NOT SUPPLIED) NOTE: 1. EXP-AH-5GS WITH EYE/FA 2. MODULES A 3. ELECTRICAL 4. SUITABLE FO...

Open the catalog to page 2

EXP-AH-5G/45G Datasheet 2Pages

Catalog excerpts

All Hughes Safety Showers catalogs and technical brochures

EXP-AH-5G/45G Datasheet
2Pages