*mydirectindustry

Catalogs
Hughes Safety Showers
EXP-AH-45GS/P Datasheet

EXP-AH-45GS/P Datasheet

Product catalog summary

Product Overview: The trace tape heated pedestal mounted eye wash with ASA closed bowl is designed to prevent freezing in cold weather conditions. It features trace tape heating and polyurethane foam insulation, making it suitable for both hazardous (ATEX Zone 1 & 2) and non-hazardous areas. The unit provides 12 liters per minute of water for effective eye flushing, adhering to EN and ANSI standards.

Materials of Construction: The bowl and lid are made of ASA, with chrome-plated brass retaining rings, stainless steel filter mesh, and a plastic body for the diffusers. The pipework is stainless steel, and the insulation is polyurethane foam with a medium-density polyethylene outer casing.

Specifications: The eye wash operates with a water inlet of 1 1/4” male BSP and an operating pressure of 2.0 to 6 BAR G (29 to 87 PSI). It requires a minimum flow rate of 12 L per minute and has a heating load of 36 Watts. The electrical supply is 230V Single Phase, 50/60Hz, with an option for 110V.

Operating Conditions: The unit is suitable for ambient temperatures ranging from -20°C to 35°C. It is equipped with a pull-down lid for operation and weighs 14 kg.

Installation and Design: The eye wash features a hinged lid, flow regulator, ATEX junction box, heating trace tape, ball valve, and two aerated diffuser nozzles. It includes a 1 1/4 inch BSP female water inlet and a 1 1/2 inch BSP male drain outlet. The design includes a polyethylene insulated jacket and is shown with an optional foot treadle.

Dimensions: The dimensions of the unit are 501mm (W) x 464mm (D) x 1183mm (H).

Catalog excerpts

Trace tape heated pedestal mounted eye wash with ASA closed bowl EXP-AH-45GS/P In order to prevent water within the pipework of the pedestal mounted eye/face wash freezing in cold weather conditions, this unit benefits from trace tape heating and polyurethane foam insulation. The integral lid prevents dust and debris contaminating the bowl and diffusers. Suitable for use in both hazardous (ATEX Zone 1 & 2) and non-hazardous areas it will provide 12 litres per minute of water to effectively and thoroughly flush the eye area. Designed in accordance with EN and ANSI standards. Justrite Safety Group

Open the catalog to page 1

General Arrangement Drawing Trace tape heated pedestal mounted eye wash with ASA closed bowl 1 2 OFF AERATED DIFFUSER NOZZLES EYE/FACEWASH BALL VALVE HEATING TRACE TAPE 1-1/2 INCH BSP MALE DRAIN OUTLET POLYETHYLENE INSULATED JACKET 1-1/4 INCH BSP FEMALE WATER INLET A 150 4x 15 HOLES FOR M12 FIXING BOLTS (NOT SUPPLIED) Whitefield Road, Bredbury Stockport, Cheshire, SK6 2SS T: +44(0)161-430-6618 E: [email protected] 1 DIMENSIONS ARE IN MILLIMETRES UNLESS SPECIFIED OTHERWISE TOLERANCES LINEAR: ANGULAR: FINISH: www.hughes-safety.com DEBUR AND BREAK SHARP EDGES Hughes Safety Showers...

Open the catalog to page 2

EXP-AH-45GS/P Datasheet

EXP-AH-45GS/P Datasheet

Catalog excerpts

All Hughes Safety Showers catalogs and technical brochures