Catalogs >
Hughes Safety Showers >
EXP-AH-45G/P Datasheet

EXP-AH-45G/P Datasheet
2Pages

Catalog excerpts

Product Datasheet Trace tape heated pedestal mounted eye wash with ABS closed bowl EXP-AH-45GS/P In order to prevent water within the pipework of the pedestal mounted eye/face wash freezing in cold weather conditions, this unit benefits from trace tape heating and polyurethane foam insulation. The integral lid prevents dust and debris contaminating the bowl and diffusers. Suitable for use in both hazardous (ATEX Zone 1 & 2) and non-hazardous areas it will provide 12 litres per minute of water to effectively and thoroughly flush the eye area. Designed in accordance with EN and ANSI standards. Shown with optional foot treadle Specifications MATERIALS OF CONSTRUCTION BOWL/LID Chrome plated brass retaining ring, stainless steel filter mesh, plastic body Stainless steel INSULATION & OUTER CASING Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing STANDARD FINISH White with green/white safety stripes SERVICES WATER INLET OPERATING PRESSURE 11/4” male BSP 2.0 to 6 BAR G / 29 to 87 PSI (higher supply pressures accommodated with the incorporation of the optional pressure reducing valve) MINIMUM FLOW RATES HEATING TYPE Trace tape heated and pre-insulated HEATING LOAD ELECTRICAL EQUIPMENT - Non-hazardous Suitable for use in areas classified as non-hazardous ELECTRICAL EQUIPMENT - Hazardous ATEX Zone 1 & 2 Gas Groups IIA and IIB, Temp Class T3 (IIC available) ELECTRIC SUPPLY 230V Single Phase, 50/60Hz (110V available) AMBIENT OPERATING TEMPERATURE MINIMUM OPERATION EYE/FACE WASH DIMENSIONS & WEIGHT DIMENSIONS (WxDxH)

Open the catalog to page 1

General Arrangement Drawing Trace tape heated pedestal mounted eye wash with ABS closed bowl EXP-AH-45GS/P 1 2 OFF AERATED DIFFUSER NOZZLES EYE/FACEWASH BALL VALVE HEATING TRACE TAPE 1-1/2 INCH BSP MALE DRAIN OUTLET POLYETHYLENE INSULATED JACKET 1-1/4 INCH BSP FEMALE WATER INLET A 150 4x 15 HOLES FOR M12 FIXING BOLTS (NOT SUPPLIED) Whitefield Road, Bredbury Stockport, Cheshire, SK6 2SS T: +44(0)161-430-6618 E: sales@hughes-safety-showers.co.uk 1 DIMENSIONS ARE IN MILLIMETRES UNLESS SPECIFIED OTHERWISE TOLERANCES LINEAR: ANGULAR: FINISH: www.hughes-safety.com DEBUR AND BREAK SHARP EDGES...

Open the catalog to page 2

EXP-AH-45G/P Datasheet 2Pages

Catalog excerpts

All Hughes Safety Showers catalogs and technical brochures

EXP-AH-45G/P Datasheet
2Pages