HÜRNER WhiteLine SPG 2.0 HÜRNER’s welding data logger SPG 2.0 is made for easy and safe welding process control and report generation pursuant to the ISO 12176 standard. The report generation system is specifically matched to HÜRNER butt-welding machines of the Manual Hydraulic series, but can of course be used with other systems effortlessly. The SPG 2.0 control software ships ex works with configurations for many third-party systems already installed. Therefore, the logger constitutes an upgrade for manually operated welding machines to achieve ISO-compliant recording, error handling, and welding process control. At every step in the welding process, the SPG 2.0 indicates the nominal and the actual values of the welding pressures and times, to walk the welder operating the hydraulic unit easily and correctly through the process. The unit thereby achieves the optimum welding process, in line with nationally applicable standards, as affecting both heating element temperatures and welding pressures and times. As soon as the nominal temperature is not kept or the welding pressure differs from the set value, the SPG 2.0 displays it and allows immediate adjustment by the on-board temperature control or pressure control, both operated at the hydraulic unit. A unique feature of the new SPG 2.0 is its user access control. Data, e. g., the welder ID code, are no longer read from a code with a scanning pen, but fed into the system by the new, user-friendly RFID technology that enables identification by simply holding an ID card in front of the front panel. Easy installation is a standard feature! The SPG 2.0 is simply mounted to the upper edge of the hydraulic unit using a dedicated support. Power to it is supplied through an isolated-ground socket at the back panel of the HÜRNER hydraulics. The very short cables needed to measure the heating element temperature and the drag and welding pressures are connected to the hydraulic unit, too. Welding data are saved to an on-board memory that can hold up to 10,000 reports, which can be downloaded as a PDF abstract or extended report to a stick or to a label tag printer. Data download in the HÜRNER DataWork format continues to be available, too. The data logger ships in a case that pleases the eye and also holds a number of positioners and pressure tr

Automatic data logging Data input Manually with a GT & cursor keypad, RFID transponder; scanner optional Welding monitoring system Welding pressures, welding times, ambient temperature, memory control, operating temperature, heating element temperature Commission number with 32 alphanumeric characters, ISO-compliant welder ID code, HÜRNER welder ID code 1st additional (user-defined) data with 20 alphanumeric characters 2nd additional (user-defined) data with 15 alphanumeric characters ISO-compliant traceability: fitting code, 1st and 2nd pipe codes, pipe length, weather conditions, joint number,...