1. Catalogs
  2. Huddig AB
  3. Huddig rail 1260C product sheet

Huddig rail 1260C product sheet

Huddig rail 1260C product sheet

Huddig rail 1260C product sheet

Product catalog summary
Overview: The HUDDIG 1260C is a powerful backhoe loader equipped with a Cummins turbocharged diesel engine, meeting Stage III B and Tier 4 Interim environmental standards.
Engine Specifications: The engine is a Cummins QSB6.7, a straight 6-cylinder water-cooled model with a power output of 116 kW (157 hp) at 1900 rpm. It has a cylinder volume of 6.7 liters and produces a torque of 662 Nm at 800 - 1400 rpm.
Transmission: Features a 2-gear hydrostatic gearbox (ZF/2HL 290) with speeds ranging from 0-10 km/hr in low gear and 0-42 km/hr in high gear. The transmission system is independent of the operating hydraulics.
Axles and Wheels: Equipped with ZF axles and automatic differential brakes with planetary hub reduction gears. Standard wheels are 520/70x34.
Brake System: Includes servo-assisted disc brakes for transport and automatic engagement of transport brakes when stationary.
Steering System: Utilizes a hydrostatic orbitrol control system with dual cylinders in the center pivot, allowing a steering angle of ±32° and frame oscillation of ±8°.
Electrical System: Operates on a 24V system with two 12V, 100 Ah batteries, an 80A AC generator, and a 5.8 kW starter motor.
Hydraulic System: Features load-sensing hydraulics with variable axial piston pumps, prepared for environmentally compatible hydraulic oils. The system provides a working pressure of 23.3 MPa and varying nominal max flows at different RPMs.
Measurements and Weight: The loader has a width of 2470 mm, a height to cab roof of 3110 mm, a length of 8630 mm, and a weight of 13200 kg including the bucket.
Backhoe and Loader Specifications: The backhoe has a reach of 6530 mm, a depth of 4900 mm, and a load height of 3770 mm. The front loader has a reach of 2630 mm and a lift height of 3500 mm.
Contact Information: HUDDIG AB, Box 1054, 824 12 Hudiksvall, Sweden. Tel: +46 650 375 00, Email: [email protected]
See more

Catalog excerpts

Huddig rail 1260C product sheet-1

The HUDDIG 1260C is our most powerful backhoe loader. It is equipped with a Cummins turbocharged diesel engine QSB6.7, which meets the environmental standard Stage III B l Tier 4 Interim. Engine Model Power output Type Cylinder volume Torque Electrical system Cummins turbocharged diesel engine QSB6.7 Stage III B l Tier 4 Interim 116 kW (157 hp) at 1900 rpm Straight 6-cylinder water cooled 6.7 liters l 409 cu in 662 Nm l 488 lb ft at 800 - 1400 rpm Transmission 2-gear hydrostatic gearbox ZF/2HL 290 Speed, 1st gear 0-10 km/hr low ratio l 0-6 mph low gear Speed, 2nd gear 0-42 km/hr high ratio l 0-26 mph high gear The transmission system is separated from the operating hydraulics. Axles ZF Automatic differential brake with planetary hub reduction gears Wheels Standard Brake system Transport brakes Service brake Servo assisted disc brakes Automatic engagement of transport brakes when stationary (automatic function can be disengaged) Steering system Hydrostatic orbitrol control system with dual cylinders in the center pivot. Steering angle ±32° Frame oscillation ±8° www.huddig.com facebook.com/huddig youtube.com/huddig Voltage 24V Batteries 2x12V, 100 Ah Generator output 80A AC Starter motor output 5.8 kW Hydraulic system Load sensing hydraulics with variable axial piston pumps, 60cc l 3.66 cu in + 100cc l 6.10 cu in (stepped-up pump distribution box provides a total of 174cc l 10.62 cu in). Low pressure compressor valves for backfilling and a heating system (circuit pump system) for cold starts. Internal servo supply to directional valve and return power for excavating functions. The hydraulic system is prepared for environmentally compatible hydraulic oils. Working pressure Nom. max. flow at 1000 rpm Nom. max. flow at 1500 rpm Nom. max. flow at 2000 rpm 23.3 MPa (233 bar) l 3380 psi 176 l/min l 46 gal/min 264 l/min l 70 gal/min 352 l/min l 93 gal/min Measurements and weight Width Height to cab roof Length Weight including bucket

 Open the catalog to page 1
Huddig rail 1260C product sheet-2

Specifications with standard buckets and 520/70x30 wheel fittings A Transport length B Wheelbase C Backhoe overhang D Height above cab E Transport height backhoe F Transport length backhoe G Ground clearance H Ground clearance angle, support legs I Maximum width support legs Width with support legs parked position J Width front bucket K Width over wheels Y3 r1 Swing radius outside bucket Y2 r2 Swing radius outside wheels Backhoe L Reach M Depth N Load height O Digging width Front loader P Reach Q Lift height leveled bucket R Load height 45° tilted bucket S Reach 45° tilt angle T Max. tilt angle...

 Open the catalog to page 2

All Huddig AB catalogs and technical brochures

  1. Huddig cable

    13  Pages

  2. Huddig rail

    11  Pages

Archived catalogs

  1. Huddig 1060B

    8  Pages

  2. Huddig 1260B

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.