1. Catalogs
  2. HUBTEX
  3. Series 2830
video corpo

Series 2830

Series 2830

Product catalog summary
Technical Specifications Overview
1. Series and Models: The Series 2830(-S) includes models M30, M35, M40, and M45. Each model has a capacity ranging from 3000 kg to 4500 kg with a standard lift height.
2. Power and Steering: All models are powered electrically and feature multidirectional steering. The seating position can be cross, diagonal, or stand-up.
3. Tyres and Wheels: Models use either Vulkollan or elastic tyres, with a configuration of 6 wheels, 2 of which are powered.
4. Mast and Fork Specifications: The lift height ranges from 3000 mm to 10000 mm depending on the model. Fork dimensions are consistent across models, with a cross-section of 45/150 mm or 50/150 mm and a length from 600 mm to 2100 mm.
5. Dimensions: The truck length is 2880 mm, with variations for specific configurations. The width to the edge of forks ranges from 850 mm to 1160 mm.
6. Weight and Load: The empty weight of the trucks ranges from 6300 kg to 7600 kg. Floor load capacity is specified as 500 to 560 N/cm² for different models.
7. Performance: Travel speed is consistent at 11 km/h with or without load. Lifting speed varies slightly between models, and ramp capability ranges from 8% to 13% depending on load conditions.
8. Tyres and Ground Clearance: Load wheels are sized at 300x100 mm or 413x178 mm, while drive wheels are 457x178 mm or 457x229 mm. Ground clearance is 75 mm, with some models offering up to 170 mm.
9. Battery and Motors: Battery capacity options range from 465 Ah to 930 Ah. Drive motors are rated at 2 x 5.0 kW, with lifting motors ranging from 19.3 kW to 25.5 kW.
10. Controls and Transmission: The trucks use AC controls and a straight bevel gear type transmission. Hydraulic pressure for attachments is standardized at 180 bar.
See more

Catalog excerpts

Series 2830-1

Technical data Drive unit Series Model Capacity Loadcenter Power supply Type of steering Position of seat Tyres Wheels (X = powered) Mast Fork cross section Fork length Fork tilt Overall dimensions Manufacturer's identification Q at standard lift height lc = distance electric / Diesel / LPG V = fourway / M = multidirectional / 2 = twoway Q = cross / D = diagonal / L = lateral / SU = stand up PU = Vulkollan / EL = elastic number h3 = lift height standard / max. s / b = thickness / width I = NB from / to standard L = truck length Sh = height over cabin roof "Q" b = width to edge of forks NB = loadbed width from / to B = truck width (at NB 1200 mm) Rh = loadbed height Ra = loadbed opening Mast reach V (at NB 1200 mm) Aisle width AST (at NB 1200 mm) Empty weight (approx.) incl. battery (with standard equipment) Floor load (approx.) incl. nominal load (static) Stability according to CE-regulations Speeds travel speed with / without nominal load lifting speed with / without nominal load lowering speed with / without nominal load mast travel speed with / without nominal load Ramp capability max. with / without nominal load Tyres number load side / drive side dimensions load wheels dimensions drive wheels Ground clearance Service brakes Parking brake Battery capacity minimum weight Electric motors drive motor rating (s2 = 60 min) lifting motor rating steering motor rating Electric controls type Transmission gear type Hydraulic pressure for attachments

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.