11923694
2Pages

{{requestButtons}}

Catalog excerpts

11923694 - 1

HO TECHNICAL SHEET 1 SINGLE ENDED RING SPANNER PRODUCER: „HUBIX" reference length [mm] weight [g] HO 8 150 24 HO 9 160 36 HO 10 160 37 HO 11 175 55 HO 12 175 57 HO 13 175 58 HO 14 190 65 HO 15 205 82 HO 16 205 84 HO 17 205 87 HO 18 205 111 HO 19 220 115 HO 22 265 170 HO 24 265 175 CHARACTERISTICS Insulating tools. Inserts of tools made of CrV. Insulation, red, made of polyamide with the 30% addition fibreglass. Tools are controlled and tested (10kV/10s) in accordance with EN 60900:2004. APPLICATION Live working up to 1000V a.c. and 1500V d.c. Tools are used to tighten or loosen screws, nuts and bolts on overhead lines and connecting boxes. STORAGE AND MAINTENANCE Insulated or insulating hand tools should be properly stored to minimize the risk of damage to the insulation due to storage or transportation. These tools should be stored generally separated from other tools to avoid mechanical damage or confusion. Tool should be prevented from excessive heat and sun light. Use a dry tissue to clean. When tool becomes strong soiled use suitable solvent to clean. CHECK AND PERIODIC INSPECTION Before use, each hand tool should be visually inspected by the user. An annual visual examination by a suitably trained person is recommended to determine the suitability of the tool for further service. The visual check shall be considered successful if: o The tool (in particular the insulation) is free from external defect, o The marking is legible and complete.

Open the catalog to page 1
11923694 - 2

Don’t use damaged, worn-out (cracks or deep scratches on insulation) or dirty tools in live working. Tool which becomes wet must be dried before use ATTENTION! In case of doubt after visual examination, the routine dielectric test should be preformed. FREQUENCY TESTS For check and periodic inspection to be carried out in according to table. CHECK PERIODIC INSPECITON Who Manager of team Supervision When Before use Once a year How Visually Visually date PERIODIC INSPECION CARD supervisor result EXAMPLE OF USE signature

Open the catalog to page 2

All Hubix Sp. z o.o. catalogs and technical brochures

  1. Equipment 1kV

    102 Pages

  2. Tools 1kV

    128 Pages

  3. HT

    2 Pages

  4. HS-2

    2 Pages

  5. HN10N

    2 Pages

  6. HN8N

    2 Pages

  7. HSZ

    2 Pages

  8. Hack-saw

    2 Pages

  9. 11923678

    2 Pages

  10. 11923671

    2 Pages

  11. HS-7

    2 Pages

  12. HS1

    2 Pages

  13. 11923683

    2 Pages

  14. 11923670

    2 Pages

  15. 11923586

    2 Pages

  16. 11923708/

    2 Pages

  17. 11923687

    2 Pages

  18. 11923680

    2 Pages

  19. 11923923

    1 Pages

  20. 11923948

    1 Pages

  21. 11923949

    1 Pages

  22. 11923922

    1 Pages

  23. 11923951

    1 Pages

  24. Equipment

    1 Pages

  25. Hand

    1 Pages

  26. Hand tools

    1 Pages

Archived catalogs