Equipment 1kV
102Pages

TECHNICAL SHEET UNIVERSAL INSULATING STICK PRODUCER: „HUBIX" diameter CHARACTERISTICS Made of fiberglass-epoxy foam filled tube in orange color. Two universal adaptors for tools and equipment to be attached. Equipment is controlled and tested (100kV/60s) in accordance with EN 60832-1:2010 APPLICATION Live working up to 1000V a.c. and 1500V d.c. Universal insulating stick with the universal adaptors which can be attached tools (for example: saws, brushes, etc.) are used during operations on overhead lines. STORAGE AND MAINTENANCE Insulating poles should be properly stored to minimize the...

The operation test: o Before use, each pole shall be inspected to check for correct function and fit. Dielectric test should be preformed every two years. (see instruction) Don’t use damaged, worn-out (cracks or deep scratches on poles) or dirty poles in live working. The pole which becomes wet must be dried before use. For check and periodic inspection to be carried out in according to table.

TECHNICAL SHEET WIRE CUTTER STICK PRODUCER: „HUBIX" diameter CHARACTERISTICS Made of fiberglass-epoxy foam filled tube in orange color. Steel cutting head, movable rod made of fiberglass. Equipment is controlled and tested (100kV/60s) in accordance with EN 60832-1:2010. APPLICATION Live working up to 1000V a.c. and 1500V d.c. It is used to cut conductors or binding wires on overhead lines. For copper and aluminium wires 16 to 95 mm2 and ACSR wires with steel core up to 3 mm diameter. STORAGE AND MAINTENANCE Insulating sticks should be properly stored to minimize the risk of damage due to...

Don’t use damaged, worn-out (cracks or deep scratches on poles) or dirty sticks in live working. The stick which becomes wet must be dried before use. For check and periodic inspection to be carried out in according to table.

TECHNICAL SHEET HOOK STICK PRODUCER: „HUBIX" diameter CHARACTERISTICS Made of fiberglass-epoxy foam filled tube in orange color. Hook operated by rod made of fiberglass and ratchet gear. Equipment is controlled and tested (100kV/60s) in accordance with EN 608321:2010. APPLICATION Live working up to 1000V a.c. and 1500V d.c. It is used to install, remove or handle clamps and various accessories equipped with an eye and hold conductors or wires during operations on overhead lines STORAGE AND MAINTENANCE Insulating hook stick should be properly stored to minimize the risk of damage due to...

o The marking is legibly and complete. o The date of periodic inspection is valid. The operation test: o Before use, each stick shall be inspected to check for correct function and fit. Dielectric test should be preformed every two years. (see instruction) Don’t use damaged, worn-out (cracks or deep scratches on poles) or dirty sticks in live working. The stick which becomes wet must be dried before use. For check and periodic inspection to be carried out in according to table.

TECHNICAL SHEET PRUNING SAW (STRAIGHT) PRODUCER: „HUBIX" CHARACTERISTICS Universal tools. Can be attached to the universal insulating stick (H010). The tool is controlled and tested in accordance with EN 60832-2:2010. Length of cutting edge: 350 mm. Weight: 150g APPLICATION Live working up to 1000V a.c. and 1500V d.c. Pruning saw is used for the trimming of tree branches near the overhead lines. STORAGE AND MAINTENANCE The pruning saws should be properly stored to minimize the risk of damage due to storage or transportation. These tools should be stored generally separated from other tools...

TECHNICAL SHEET PRUNING SAW (CURVED) PRODUCER: „HUBIX" CHARACTERISTICS Universal tools. Can be attached to the universal insulating stick (H010). The tool is controlled and tested in accordance with EN 60832-2:2010. Length of cutting edge: 350 mm. Weight: 140g APPLICATION Live working up to 1000V a.c. and 1500V d.c. Pruning saw is used for the trimming of tree branches near the overhead lines. STORAGE AND MAINTENANCE The pruning saws should be properly stored to minimize the risk of damage due to storage or transportation. These tools should be stored generally separated from other tools to...

TECHNICAL SHEET PRUNING SAW (CURVED) PRODUCER: „HUBIX" CHARACTERISTICS Universal tools. Can be attached to the universal insulating stick (H010). The tool is controlled and tested in accordance with EN 60832-2:2010. Length of cutting edge: 400 mm. Weight: 490g APPLICATION Live working up to 1000V a.c. and 1500V d.c. Pruning saw is used for the trimming of tree branches near the overhead lines. STORAGE AND MAINTENANCE The pruning saws should be properly stored to minimize the risk of damage due to storage or transportation. These tools should be stored generally separated from other tools to...

TECHNICAL SHEETCONDUCTOR CLEANING BRUSCH 09.2013 PRODUCER: „HUBIX” width CHARACTERISTICS Steel brush with splined end attached to the universal insulating stick (H010). The brush is controlled and tested in accordance with EN 60832-2:2010. • • 2 Live working up to 1000V a.c. and 1500V d.c. The brush is used to clean wires (up to 95mm ) before attachment clamps or the shunt devices on overhead lines. The cleaning brushes should be properly stored to minimize the risk of damage due to storage or transportation. These tools should be stored generally separated from other tools to avoid...

For check and periodic inspection to be carried out in according to table.

CHARACTERISTICS Tool made of steel rod 010mm with splined end attached to the universal insulating stick (H010). Equipment is controlled and tested in accordance with EN 60832-2:2010. Live working up to 1000V a.c. and 1500V d.c. Tool is used to tighten clamps on overhead lines. The spiral hooks should be properly stored to minimize the risk of damage due to storage or transportation. These tools should be stored generally separated from other tools to avoid mechanical damage or confusion. Tools should be prevented from excessive heat and sunlight. Use a dry tissue to clean. When tool...